Krone Big Pack 1270 XC, Оригинальная инструкция по эксплуатации

Страница: 115 / 448

Operation 9
Lifting/lowering bale chute 9.14
BiG Pack 1270 XC
Original Operating Instructions 150000748_01_en 115
Position (II) = Fold down bale chute
„ Switch off the PTO shaft and wait until trailing machine parts have come to a complete stop.
„
Secure the tractor against rolling away.
„ Apply the parking brake ( refer to page 121 ) and the flywheel brake ( refer to page 100 ) of
the machine.
„
Close the stop cock (3).
„
Actuate the control unit ( ).
„
Unlock the mechanical locking (1) of the bale chute.
„ Open stop cock (2).
Lowering into working position
„ With the safety sleeve (4) tightened, move the lever (5) downwards to position (II) and hold it
until the bale chute is lowered.
Lifting into transport position
„ With the safety sleeve (4) tightened, move the lever (5) upwards to position (I) and hold it
until the bale chute is lifted.
„ Close the mechanical locking (1) of the bale chute.
„
Close the stop cock (2).
For “Comfort 1.0” version
The terminal can only be used for lowering the bale chute. The bale chute can be lifted by
means of the external momentary switches.
1
1
BP000-134
„
Switch off the PTO shaft and wait until trailing machine parts have come to a complete stop.
„
Secure tractor against rolling away.
„
Apply parking brake, refer to page 121 .
„ Apply flywheel brake refer to page 100 .
„
Without “Load Sensing” version: Actuate the control unit ( ).
„ Unlock the mechanical locking (1) of the bale chute.