6
OPERATION
60
OPTIFLEX 1300 C
www.krohne.com
01/2008 • 4000172301 - HB OPTIFLEX 1300 R02 en
Operation
6.1 User modes
There are 3 modes of operation:
•
Operator.
•
Supervisor.
•
Service.
6.2 Operator mode
The operator can choose what information to display.
This section shows you:
•
What each button does in operator mode.
•
What special function each button has if it pressed for more than 1 second.
•
How to move from one screen of information to another.
Some data will only be available if the instrument is correctly configured by the supervisor, as
described below.
Push button functions in operator mode
Push button
Description
Normal function
"Hot key" function
Right
Change display style
1
Enter program mode
2
Enter
-
Enter signal screen editing mode
3
Down
Change measurement parameter
4
The screen shown at this time
becomes the default screen
2
Up
Change measurement parameter
4
Display language will change to
English
5
Esc (Escape)
-
-
1
value, value and picture, or value and bar graph
2
when you press this button for 1 second
3
only when the signal screen is selected. For more data, refer to section 6.4.8.
4
level, distance, volume etc.
5
when you press this button for 3 seconds. Press the button again and it will go back to the original language.
HB_OPTIFLEX1300_EN_D4_080428.book Page 60 Tuesday, April 29, 2008 2:47 PM