3
INSTALLATION
30
OPTIFLEX 1300 C
www.krohne.com
01/2008 • 4000172301 - HB OPTIFLEX 1300 R02 en
•
Put the end of the probe into the tube.
The probe counterweight has a hole with an M8 internal thread. You can also select the
appropriate options and attach:
1. An anchoring rod
2. A turnbuckle
For more data, contact your supplier.
•
Weld a tube with an internal diameter of 12 mm / 0.5" to the bottom of the tank.
i
Make sure the tube aligns with the process connection at the top of the tank.
•
Lower the probe into the tank.
Double cable Ø4 mm/0.15"
Figure 3-20:
How to attach a double cable probe to keep it straight
Single rod Ø8 mm/0.3"
Figure 3-21:
How to attach a single rod probe to keep it straight
1
2
HB_OPTIFLEX1300_EN_D4_080428.book Page 30 Tuesday, April 29, 2008 2:47 PM