5
START-UP
58
OPTIFLEX 1300 C
www.krohne.com
01/2008 • 4000172301 - HB OPTIFLEX 1300 R02 en
5.3.4 How to start the instrument
•
Connect the converter to the power supply.
•
Energize the converter.
i
After 30 seconds the screen will display "booting up", "starting up" and then the default
screen will appear.
•
The instrument will start to display readings.
i
Measurements agree with specifications given in the customer order.
5.4 Remote communication with PACTware
™
PACTware
™
displays measurement information clearly and lets you configure the instrument
from a remote location. It is an Open Source, open configuration software for all field
instruments. It uses Field Device Tool (FDT) technology. FDT is a communication standard for
sending information between the system and the field instrument. This standard agrees with
IEC PAS 62453. Field instruments are easily integrated. Installation is supported by a user-
friendly Wizard.
Install this software:
•
Microsoft
®
.NET Framework version 1.1 or later
•
PACTware 3.0
•
HART
®
interface module (USB, RS232...)
•
The Device Type Manager (current DTM Version 1.0.0.34) for the instrument
The sofware and installation instructions are given on the CD-ROM supplied with the instrument.
You can also download PACTware
™
and the DTM from our download centre.
Refer also to the PACTware
™
consortium site at http://www.pactware.de/index_en.htm.
CAUTION!
If the manufacturer received information about the installation, the instrument will display
readings correctly. If not, refer to the quick setup procedures.
HB_OPTIFLEX1300_EN_D4_080428.book Page 58 Tuesday, April 29, 2008 2:47 PM