3
INSTALLATION
32
OPTIFLEX 1300 C
www.krohne.com
01/2008 • 4000172301 - HB OPTIFLEX 1300 R02 en
The probe counterweight has a hole with an M8 internal thread. You can attach:
1. A threaded end
2. A chuck
If you chose a chuck to anchor the probe, we recommend that you fit a ferrule (metal sheath) at
the bottom of the loop to prevent cable wear. For more data, contact your supplier.
•
Weld a tube with an internal diameter of 23...25 mm / 0.91...1" to the bottom of the tank.
i
Make sure the tube aligns with the process connection at the top of the tank.
•
Lower the probe into the tank.
•
Put the end of the probe into the tube.
If this is not possible, you can attach braces to the probe.
Single cable Ø2 mm/0.08"
Figure 3-23:
How to attach a Ø2 mm/0.08" single cable probe to keep it straight
Coaxial Ø21.3 mm/0.8"
Figure 3-24:
How to attach a coaxial probe to keep it straight
2
1
HB_OPTIFLEX1300_EN_D4_080428.book Page 32 Tuesday, April 29, 2008 2:47 PM