3
INSTALLATION
46
OPTIFLEX 1300 C
www.krohne.com
01/2008 • 4000172301 - HB OPTIFLEX 1300 R02 en
3.8.5 How to attach the weather protection to the instrument
Equipment needed:
•
Instrument
•
Weather protection (option)
•
10 mm wrench (not supplied)
The overall dimensions of the weather protection are on page 147.
•
Loosen the bracket nuts on the weather protection.
•
Remove the bracket .
•
Lower the weather protection onto the instrument.
•
Turn the weather protection so that the keyhole points forward.
•
Attach the bracket.
•
Lift the weather protection to the top of the housing support pillar.
•
Hold the weather protection in the correct position and tighten the bracket nuts.
Figure 3-38:
Installation of the weather protection
1
2
3
4
5
HB_OPTIFLEX1300_EN_D4_080428.book Page 46 Tuesday, April 29, 2008 2:47 PM