INSTRUMENT DESCRIPTION
2
11
OPTIFLEX 1300 C
www.krohne.com
01/2008 • 4000172301 - HB OPTIFLEX 1300 R02 en
2.2 Instrument description
The
OPTIFLEX 1300 C
is a TDR level transmitter. It is designed to measure the distance, level,
interface, mass and volume of liquids, pastes, slurries, granulates and powders.
TDR level transmitters use a probe to guide a signal to the surface of the measured product.
OPTIFLEX 1300 C
has a choice of 6 probes. Thus, it can measure most products in difficult
conditions. For more data, refer to
Technical data
on page 137.
The instrument has a setup wizard, fully-potted electronic sub-assemblies and online help
functions. You usually will not need this Handbook to install, setup and operate the instrument.
You can order these accessories:
•
stainless steel weather protection.
•
RS232/HART
®
converter (VIATOR).
Figure 2-2:
Scope of delivery for the remote housing version
1
Signal converter and probe
2
Probe. If a single rod probe is ordered, this is supplied not attached to the instrument. The assembly instructions and
small parts are in a bag attached to the housing
3
Quick Start
4
CD-ROM. This contains the Handbook, the Quick Start, the Technical Datasheet and related software.
5
Flexible conduit
6
Wall bracket (also for installation on pipes)
5
6
INFORMATION!
No special tools, no training required!
HB_OPTIFLEX1300_EN_D4_080428.book Page 11 Tuesday, April 29, 2008 2:47 PM