TQC
Work
Verify
Ultasound Ultraprobe 10,000 Instructions
General Setup and Knowledge Ultraprobe 10,000
Rev. 1.0
3/2012 SAFETY: Wrist Strap to be worn at ALL TIMES
5 min
UE Systems Training
*Compact Flash Card & Module Inserted BEFORE Turing Ultraprobe ON*
PULL TRIGGER and HOLD to turn Ultraprobe ON
and keep trigger pulled to stay on.
1
YELLOW ENTER button used to select items.
BLACK round dial is SENSITIVITY KNOB, rotates
to SELECT, clicks to CONFIRM SELECTION.
2
Three posisitions on MAIN DISPLAY. Area flashing is
Cursor. Push Sensitivity to move to 1.Sensitivity Setting
2.Frequency Adjustment 3.Function Bar/Indicator.
3
Click the Sens. Knob 2X to move cursor to Function
Bar. Once flashing ROTATE Sens. until "PRESS
ENTER FOR SETUP MENU," appears.
4
Page 1 of 6
