SERVICE MANUAL
4-78
9G9002 – 2011-08-15
Film Jam in Area 1 – Error Code 116 (Web Portal code 21116)
[1]
If possible, close the film cartridge.
[2]
Remove the film cartridge from the laser imager.
[3]
Remove any films jammed in
Area 1
. Access this area from the front of the imager through the film supply.
Note
If the film is not accessible from the film supply, continue with Step
4
.
[4]
Remove the top cover
.
[5]
Remove the left cover
.
[6]
Remove any jammed films in the pickup access area.
[7]
If Area 1 did not contain jammed films, take the film cartridge to a dark room and remove any jammed films.
[8]
Reinsert the film cartridge into the laser imager.
[9]
Install the left cover.
[10]
Install the top cover.
Pickup access area
