SERVICE MANUAL
4-40
9G9002 – 2011-08-15
Condition Code: 20-209 – Imager Opened During Self Test
Condition Code: 20-449 – Processor Filter Maintenance Required
Web Portal Message
Log Message
DICOM Printer
StatusInfo
Severity
Laser Imager Opened
During Self Test
Top, Side, or Front
Cover Opened During
Self Test
PRINTER DOWN
0-Fatal
Description
This error occurs during MCS diagnostics when the laser imager determines
that a cover was opened during the execution of self test. The error clears only
when power is cycled.
System Impact
The imager is unable to print films. The spooler is still able to accept jobs but
new films will not be initiated. Films in progress will not be completed. [SI-3]
User Action
1. Close the open top cover or the open cover.
2. Shut down the laser imager, then restart the laser imager.
3. If the error persists, call for service.
FE Action
1. Check that the following are closed and secured:
• Top cover
• Film supply (front) and back covers
2. De-energize and then energize the laser imager.
Show at DS
True
DICOM Printer
Status
FAILURE
Unique Symb. ID
ERR_MCS_DOOR_OPENED_DURING_SELF_TEST
Web Portal Message
Log Message
DICOM Printer
StatusInfo
Severity
None
Processor Filter
Maintenance Required
NORMAL
3-Notify
Description
This notification is written to the log when the processor filter maintenance
(PFM) sheet count exceeds the PFM sheet count limit.
Note
This notification is shown to the user but is different from other “errors” because
it is a special situation.
System Impact
None. The system will function normally. [SI-0]
User Action
None
FE Action
1. Change the filter.
2. Use the service tool to reset the Counts to Filter Change.
Show at DS
True
DICOM Printer
Status
NORMAL
Unique Symb. ID
ERR_PFM_REQUIRED
