Diagnostics
9G9002 – 2011-08-15
4-61
Condition Code: 26-326 – Jam Exiting Exposure Transport to Processor
Web Portal Message
Log Message
DICOM Printer
StatusInfo
Severity
Film Jam in Area 2 or 3 Film Jam Exiting
Exposure Transport to
Processor: SOP sensor
(S6) failed to detect film
trailing edge
FILM JAM
1-Alert
Description
This error occurs if the trailing edge (as determined by film direction) is not
detected at the SOP (start-of-page) sensor (S6) after the film has entered the
exposure transport area from the accumulator on its way to the processor. The
error is cleared when the film supply is opened then closed.
When this error occurs, the processor stops rotating and the heater is turned
off. All jobs in the imager will fail and then automatically reprint.
System Impact
The imager can only print jobs that were in process when the error occurred.
The spooler can still accept jobs, but the jobs will not print until the error is
resolved. All jobs that were in process when the error occurred will reprint
completely when the error is resolved. [SI-1]
User Action
Clear the jam (see
“Film Jam in Area 2 or 3 – Error Code 326 (Web Portal code
26326)”
).
Show at DS
True
DICOM Printer
Status
WARNING
Unique Symb. ID
ERR_PRE_DENSITOMETER_JAM
Logged for RMS
[CartridgeInfo=bbeeee-cjj-d-iii][FilmSize=size]
