SERVICE MANUAL
4-10
9G9002 – 2011-08-15
Condition Code: 01-000 – General Configuration and Control Subsystem Error
Condition Code: 01-001 – Maximum Number of Allowed Restarts for a Subsystem or
Component Has Been Exceeded
Web Portal Message
Log Message
DICOM Printer
StatusInfo
Severity
None
General Error in
Configuration and Control
Subsystem
NORMAL
3-Notify
Description
A general error occurred in the Configuration and Control Subsystem.
System Impact
Unknown. This is an unexpected or unknown error; it is not possible to
document specific details.
User Action
None
Show at DS
False
DICOM Printer
Status
NORMAL
Unique Symb. ID
ERR_CONFIG_CONTROL
Web Portal Message
Log Message
DICOM Printer
StatusInfo
Severity
None
Maximum Number of
Restarts Exceeded for xxxx
(where xxxx is the
subsystem name)
NORMAL
2-Warning
Description
When a subsystem or component generates a non-recoverable, Configuration-
and-Control will attempt to shut down and restart it. This error means that
Configuration-and-Control has initiated more than the configured number of
allowed restarts.
System Impact
The system will continue to run normally, unless the subsystem or component
in question cannot run any longer.
User Action
None
DICOM Printer
Status
NORMAL
Unique Symb. ID
ERR_EXCEED_MAX_RESTARTS
