Konica Minolta DRYPRO SIGMA, Руководство по обслуживанию

Страница: 133 / 206

Diagnostics
9G9002 – 2011-08-15 4-55
Condition Code: 21-178 – Rollback Failed to Leave Home
Condition Code: 21-624 – Bad Densitometer Data
Web Portal Message Log Message
DICOM Printer
StatusInfo Severity
Rollback Failed to
Leave Home Rollback Home Sensor
(S6U) failed to deactivate
in specified time BAD SUPPLY MGZ 1-Alert
Description
This error occurs only when attempting to open a film cartridge. This error
occurs if the rollback mechanism movement from its home position toward open
is not confirmed by the rollback home sensor (S2x). Because no rollback
movement was detected, either the rollback motor (M6x) failed or the sensor
failed. The error is cleared when the film supply is closed (as indicated by the
supply drawer interlock switch i1x), or when power is cycled.
System Impact
Cannot print from the loaded film cartridge. The spooler is still able to accept
and queue jobs. [SI-2].
User Action
1. Insert a new film cartridge.
2. If the error persists, call for service.
Show at DS
True
DICOM Printer
Status
WARNING
Unique Symb. ID
ERR_UP_ROLLBACK_NOT_LEAVE
Logged for RMS
[CartridgeInfo=bbeeee-cjj-d-iii][FilmSize=size]
Web Portal Message Log Message
DICOM Printer
StatusInfo Severity
Film Supply: Film
Calibration Failure Film Supply:
Calibration Failed CALIBRATION ERR 1-Alert
Description
This error occurs when the density readings that come from the calibration print
are not monotonic or the densitometer did not find exactly 21 steps in the
calibration wedge. The most likely cause is fogged or expired film. The error is
cleared when a film cartridge is removed and then re-inserted.
System Impact
Cannot print from the loaded film cartridge. The spooler is still able to accept
and queue jobs. [SI-2]
User Action
1. Insert a different film cartridge.
2. If the error repeats, restart the imager.
3. If the error persists, call for service.
Show at DS
True
DICOM Printer
Status
WARNING
Unique Symb. ID
ERR_UP_BAD_DENSITOMETER_DATA
Logged for RMS
[CartridgeInfo=bbeeee-cjj-d-iii][FilmSize=size][TriggerValues=a,b,c,...,u]
[TriggerNotes=Optical Density values, from max to min]