Adjustments and Replacements
9G9002 – 2011-08-15
2-7
Imaging Assembly—Page Start Adjustment
Adjustment Specification
To Check:
The leading edge affected by the Page Start adjustment is shown for each film size.
[1]
Log on to the service tool.
[2]
From the Service menu, select
Diagnostics > DRE > Advanced Test Print
.
[3]
Select
Smpte8Bit
from the Test Profile drop-down list.
[4]
Click
Run
.
Purpose:
To adjust Start of Page timing to obtain a 2.00 mm (0.08 in.) half-tone density border at
the leading edge of the film.
Note
that for notched film, this is the edge opposite the
notch.
Specification:
A 2.00 mm (0.08 in.) half-tone border is visible only at the leading edge of the film.
Special Tools:
• Laptop computer with MICROSOFT INTERNET EXPLORER
• Service tool
• Crossover cable
Prerequisites
None