Kobelco SK235SR-2, Руководство по эксплуатации

Страница: 269 / 308

６
6.4 BUCKET AND ARM COMBINATIONS
A. Front Attachment Variation
(1) Outline
This machine is equipped with attachments in various types in order to comply with various
operations.
・
When large capacity bucket is used, it should be used in combination of short arms to secure
the stability of machine and not to be forced to operate machine, front section and each cylinder.
・
When long boom and arm are used, conversely combine with the small capacity bucket.
-If any other bucket except for the backhoe bucket is turned over and used for excavation, damage
to the arm and bucket may occur.
-Do not operate the power boost switch when a long arm is installed.
-When the 2.94 m (9'-8") arm is used, do not reverse the bucket. If the bucket is reversed, the bucket
bumps against arm by shoveling and it results damaging attachment.
◎
: Standard combination
○
: General operation; Excavation or loading of sand, gravel, and clay
△
: Light operation; Mainly loading of loose gravel (e.g., cultivation or loading of sand or gravel)
× : Prohibited combination; KOBELCO's warranty does not cover any damages resulting from theses
combinations. Do not use these combinations.
Install only genuine attachment recommended by KOBELCO on the machine. KOBELCO is not liable
for any damages to the machine or attachment arising from the installment of attachment other than
the specified attachments.
［ 6. SPECIFICATIONS ］
6-7
Copyright © 2015 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2YF00022ZE01] [0731CsCshWbYs]