Kobelco SK235SR-2, Руководство по эксплуатации

Страница: 128 / 308

1. Check fuel level with fuel gauge by turning
starter switch on. The fuel level is low
when the fuel gauge reads close to E point.
2. Stop engine with starter key, remove filler
cap (1) of fuel tank and make it up with
fuel making sure of the level.
When strainer is fitted to filler port, do not
remove the strainer for making up.
3. When dirt is adhered on strainer (2), take
out the strainer and clean it with light oil or
air gun, and then fit it to filler port again.
4. Refer to "4.3 LUBRICANT, FUEL &
COOLANT SPECIFICATIONS" in Chapter 4.
-Fuel tank capacity: 330 L (87 gal)
5. After refueling, tighten filler cap (1) securely.
C. Checking Fuel Level and Making Up
-Use diesel fuel only and stop engine before refilling.
-Do not overflow fuel while refilling. It may cause damage to the fuel system and cause oil spouting.
Clean up all spilled fuel to prevent fire.
-Dispose of all hazardous waste in accordance with government environmental laws and regulations.
-It is possible to operate machine for 2 days (8 hours a day) in general use when the tank is full. Be
sure to fill it up to the brim after the work in 2nd day was finished. But do not supply with fuel to
the level more than necessary (to the top end of tank). There is a possibility of overflowing because
the fuel expands as the outside air temperature rises.
-Use specified diesel oil for fuel.
This engine is equipped with electronic control high pressure fuel injection system to obtain the
features like excellent fuel consumption and emission in clean condition. This system requires the parts
in high precision and high lubricating ability. Therefore if low viscosity fuel in low lubricating ability is
used, the durability may be notably lowered.
［ 3. MACHINE OPERATION ］
3-6
Copyright © 2015 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2YF00022ZE01] [0731CsCshWbYs]