Kobelco SK235SR-2, Руководство по эксплуатации

Страница: 165 / 308

1.
Place both travel levers (1) into the "NEUTRAL"
position.
2.
Turn throttle dial (2) to low idling position and
cool down for about 5 minutes.
3.
Put bucket on the ground holding the bucket
bottom level.
4.
Set starter key switch (3) to "OFF" position
and stop the engine, and then pull out the
starter key.
３
3.1.16 PARKING THE MACHINE
AVOID INJURY
-Always park the machine on a hard level, surface.
-When parking on a slope is unavoidable, position the machine as shown in the figure. Block the
crawler track, dig bucket teeth into ground, lower dozer blade (if equipped) to the ground. This will
help prevent machine movement.
-Set the safety lock lever to the "locked" (up) position to avoid any unexpected machine movement.
-Stop the engine before leaving the cab.
-If the machine is to be parked on a road way, move the machine to the shoulder to allow passing
of traffic. Also post reflective warning signs and markers at a distance from the machine to safely warn
motorists. Refer to local code and regulations regarding the posting of work area warnings and
markers.
［ 3. MACHINE OPERATION ］
3-43
Copyright © 2015 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2YF00022ZE01] [0731CsCshWbYs]