4. Use «Up» or «Down» to set the time format.
5. Press «Enter».
The setting is applied.
6. Press «Escape» repeatedly to leave this menu.
Setting the pressure display units
Set the pressure unit for display:
Format
Example
bar
5.5bar
hPa
5523hPa
MPa
0.55MPa
psi
80psi
at
5.6at
kPa
550 kPa
1)
"Hg
15 "Hg
2)
1)
SIGMA CONTROL 2 SCREW FLUID
2)
SIGMA CONTROL 2 SCREW VAC
Tab. 49 Possible settings for the pressure unit
Precondition Access level 2 is activated.
1. Open the 5.1
<Configuration – General> menu.
2. Use «Up» or «Down» to select the
Pressure unit line.
6 . 1 b a r
0 8 : 1 5 A M
8 0 ° C
Header
5.1 General
Menu
Time format
hh:mm:ssAM/PM
·········
Pressure unit
bar
Unit of pressure
Temperature unit
°C
Unit of temperature
·········
Display lighting
3. Press «Enter».
The display for the set unit flashes.
4. Use «Up» or «Down» to set the unit.
5. Press «Enter».
The setting is applied.
6. Press «Escape» repeatedly to leave this menu.
8
Initial Start-up
8.2
Setting the controller
68
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.0.X
No.: 9_9450 12 E
