3. Press the «DOWN» key.
6 . 1 b a r
0 8 : 1 5 A M
8 0 ° C
Header
5.1 General
Menu
·········
Model:
XXXXXX
set machine type
·········
Date/time
04/13/21
08:15:37AM
current date and time
4. Press the «Right» key.
5. Press «Enter».
The display for hours
00:00:00 flashes.
6. Use «Up» or «Down» to set the hours.
7. Press the «Right» arrow.
The display for minutes
00:00:00 flashes.
8. Use «Up» or «Down» to set the minutes.
9. Press the «Right» arrow.
The display for seconds
00:00:00 flashes.
10. Use «Up» or «Down» to set the seconds.
11. Press «Enter».
The setting is applied.
12. Press «Escape» repeatedly to leave this menu.
Check/set the date
Precondition Access level 2 is activated.
1. Open the 5.1
<Configuration – General> menu.
2. Use «Up» or «Down» to select the
Date/time line.
3. Press the «DOWN» key.
6 . 1 b a r
0 8 : 1 5 A M
8 0 ° C
Header
5.1 General
Menu
Model:
XXXXXX
set machine type
·········
Date/time
04/13/21
08:15:37AM
current date and time
Europe/London
Time zone
4. Press «Enter».
The display for days
00.00.00 flashes.
5. Use «Up» or «Down» to set the day.
6. Press the «Right» arrow.
The display for months
00.00.00 flashes.
8
Initial Start-up
8.2
Setting the controller
No.: 9_9450 12 E
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.0.X
65
