KAESER KOMPRESSOREN SIGMA CONTROL 2, Руководство пользователя

Страница: 13 / 246

1.3 Main menu overview
Press «Up» / «Down» / «Enter» to open the main menu.
Menu no. Menu name Function
1 Status Displays messages, statistics and status information
2 Performance data Displays measured data from the machine and its components (e.g.
motors)
3 Operating data Displays operating hours, switching cycles and energy data
4 Maintenance Displays maintenance data from the machine and its components
5 Configuration Sets machine parameters, compressed air system and accessories
6 Compressor clock Time control settings
7 User Manual user log-in and password administration
8 Communication Sets the Ethernet interface, com modules and control system con‐
nection
9 Machine test Checks the safety valve / temperature sensor for excessive temper‐
ature shutdown
10 Components Displays machine component settings, e.g. power switching
Tab. 3 Main menu overview
See chapter 5.7.2 for the complete menu structure
1.4 Functions overview
Function Menu
no.
Steps Chapter
Sets the contrast Main
menu
Press and hold down «Information» – «Up» / «Down» 8.2.12
Sets the bright‐
ness level
Main
menu
Press and hold down «Information» – «Left» / «Right» 8.2.12
Sets the lan‐
guage
Main
menu
«Enter» – «Up» – «Enter» – «Up» / «Down» 8.2.2
Sets the date,
time and time
zone
5.1
<Configuration – General>
8.2.8
User log-in with
RFID Equipment
Card
– 8.2.4
Sets the pres‐
sure parameters
5.2.2 <Configuration – Pressure control – Pressure settings –
pA/pB>
8.5
Sets the
«time control»
6
<Compressor clock – Set timing programme>
8.6.1
1 SIGMA CONTROL 2 Quick reference guide
1.3 Main menu overview
No.: 9_9450 12 E
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.0.X
3