9.6 Setting the working pressure
➤ Adjust the pressure parameter to suit the compressor and application.
Further information A detailed explanation of all pressure parameter settings is given in chapter 8.5.
9.7 Displaying analogue data
The following information regarding the components shown below can be called up in
the
Performance data menu option:
■ Compressor
■ Compressor motor
■ Fan
■ Analogue values
■ SIGMA CONTROL 2
Displaying analogue data
Precondition Access level 2 is activated.
The operating mode is displayed.
1. Open the 2
Performance data menu.
A list of the components is displayed.
6 . 1 b a r
0 8 : 1 5 A M
8 0 ° C
Header
2 Performance data
Menu
▶1 Compressor
Active line
▶2 Compressor motor
▶3 Fan
▶4 Analogue values
▶5 SIGMA CONTROL 2
2. If necessary, repeatedly press «Up» or «Down» to select the required component.
3. Press «Enter».
The measured data of the selected component are displayed.
6 . 1 b a r
0 8 : 1 5 A M
8 0 ° C
Header
2.1 Compressor
Menu
System pressure pNloc
6.1 bar
Local System pressure pNloc
·········
ADT
T
80°C
Airend discharge temperature
dT/dt
0.0°C/s
Rise of airend discharge temperature
·········
Oil separator
Δp
0.0bar
Differential pressure, oil separator cartridge
9
Operation
9.6
Setting the working pressure
No.: 9_9450 12 E
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.0.X
183
