KAESER KOMPRESSOREN SIGMA CONTROL 2, Руководство пользователя

Страница: 177 / 246

8.12.4.2 Set the time delay
The delay can be set between 0 and 600 seconds. The delay is counted down from 600 in 1
second increments with the «DOWN» key and counted upwards from 0 (zero) in 1 second
increments with the «UP» key.
1. Use «Up» or «Down» to select the
td line.
2. Press «Enter».
The
td delay time flashes.
6 . 1 b a r 0 8 : 1 5 A M 8 0 ° C
Header
5.7.4.1 System pressure pNloc
Menu
active: ☐
·········
SP: 0.50bar ¦ SD: −0.6bar
Switching point (SP) and switching differential (SD)
td: 0s ¦Logic +
Delay (td) and logic
DOR1.01 ☐
Output DOR
Operation ☐
Type of message
3. Use «Up» or «Down» to set the time delay in seconds.
4. Press «Enter».
Result The
td delay time has been set.
8.12.4.3 Assign and activate the output
Once the threshold has been reached you can switch a digital output
DOR.
1. Use «Up» or «Down» to select the
DOR line.
2. Press «Enter».
The
DOR display flashes.
3. Select the output with the «Up» and «Down» keys.
4. Press «Enter».
The setting is applied.
6 . 1 b a r 0 8 : 1 5 A M 8 0 ° C
Header
5.7.4.1 System pressure pNloc
Menu
active: ☐
·········
SP: 0.50bar ¦ SD: −0.6bar
Switching point (SP) and switching differential (SD)
td: 0s ¦Logic +
Delay (td) and logic
DOR1.03 ok ☑
Output DOR
Operation ☐
Type of message
5. Press the «Right» key.
6. Press «Enter».
The check box assigned to the output flashes.
7. Press the «Up» key.
The check box is activated.
8 Initial Start-up
8.12 Setting input and output signals
No.: 9_9450 12 E
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.0.X
167