KAESER KOMPRESSOREN SIGMA CONTROL 2, Руководство пользователя

Страница: 178 / 246

8. Press «Enter».
The output is assigned and activated.
ok is displayed.
8.12.4.4 Setting the message type
1. Select the message type line with the «Up» and «Down» keys.
2. Press «Enter».
The display for the message type flashes.
3. Use «Up» or «Down» to set the message type.
6 . 1 b a r 0 8 : 1 5 A M 8 0 ° C
Header
5.7.4.1 System pressure pNloc
Menu
active: ☐
·········
SP: 0.50bar ¦ SD: −0.6bar
Switching point (SP) and switching differential (SD)
td: 0s ¦Logic +
Delay (td) and logic
DOR1.03 ok ☑
Output DOR
Warning ☑
Type of message
4. Press «Enter».
5. Press the «Right» arrow.
6. Press «Enter».
The check box assigned to the message type flashes.
7. Press «Up» key.
The message is activated.
8. Press «Enter».
Result The message type is set and activated.
8.12.4.5 Activating the threshold
1. Use «Up» or «Down» to select the
active: line.
2. Press «Enter».
The check box will flash.
6 . 1 b a r 0 8 : 1 5 A M 8 0 ° C
Header
5.7.4.1 System pressure pNloc
Menu
active: ☑
active line with check box
·········
SP: 0.50bar ¦ SD: −0.6bar
Switching point (SP) and switching differential (SD)
td: 0s ¦Logic +
Delay (td) and logic
DOR1.03 ok ☑
Output DOR
Warning ☑
Type of message
3. Press the «Up» key.
The check box is activated.
8 Initial Start-up
8.12 Setting input and output signals
168
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.0.X
No.: 9_9450 12 E