J-Web
■
On SRX3400, SRX3600, SRX5600, and SRX5800 devices, the LEDs on the Routing
Engine and PICs are not shown as green when they are up and online on the
J-Web Chassis View. [PR/297693]
■
On SRX Series devices, when the user adds LACP interface details, a pop-up
window appears in which there are two buttons to move the interface left and
right. The LACP page currently does not have images incorporated with these
two buttons. [PR/305885]
■
On SRX210 devices, there is no maximum length limit when the user commits
the hostname in CLI mode; however, only a maximum of 58 characters are
displayed in the J-Web System Identification panel. [PR/390887]
■
On SRX210, SRX240, and SRX650 devices, the complete contents of the ToolTips
are not displayed in the J-Web Chassis View. As a workaround, drag the Chassis
View image down to see the complete ToolTip. [PR/396016]
■
On SRX100, SRX210, SRX240, and SRX650 devices, the LED status in the Chassis
View is not in sync with the LED status on the device. [PR/397392]
■
On SRX Series devices, when you right-click
Configure Interface
on an interface
in the J-Web Chassis View, the Configure > Interfaces page for all interfaces is
displayed instead of the configuration page for the selected interface. [PR/405392]
■
On SRX210 Low Memory devices, in the rear view of the Chassis viewer image,
the image of ExpressCard remains the same whether a 3G card is present or
not. [PR/407916]
■
On SRX210, SRX3400, SRX3600, SRX5600, and SRX5800 devices, selecting
Configure>Security>Policy>IDP Policies>Security Package Update>Help
in the J-Web user interface brings up the IDP policy Help page instead of the
Signature update Help page. To access the corresponding Help page, select
Configure>IDP>Signature Update
and then click
Help
. [PR/409127]
■
On SRX Series devices, the CLI Terminal feature does not work in J-Web over
IPv6. [PR/409939]
■
On SRX210 High Memory, SRX240 PoE, and J Series devices, IDP custom attacks
and dynamic attack groups cannot be configured using J-Web. [PR/416885]
■
On J2350, J4350, and J6350 devices, users cannot configure firewall filters using
J-Web. The Firewall Filters menu was removed because it was not functioning
properly. [PR/422898]
■
On SRX210, SRX240, J2350, J4350, and J6350 devices, when J-Web users select
the tabs on the bottom-left menu, the corresponding screen is not displayed
fully, so users must scroll the page to see all the content. This issue occurs when
the computer is set to a low resolution. As a workaround, set the computer
resolution to 1280 x 1024. [PR/423555]
■
On SRX Series and J Series devices, users cannot differentiate between Active
and Inactive configurations on the System Identity, Management Access, User
Management, and Date & Time pages. [PR/433353]
■
On SRX210 device, in Chassis View, right-clicking any port and then clicking
Configure Port takes the user to the Link aggregation page. [PR/433623]
Issues in JUNOS Release 10.1 for SRX Series Services Gateways and J Series Services Routers
■
151
Issues in JUNOS Release 10.1 for SRX Series Services Gateways and J Series Services Routers
