manualshive.com logo in svg

Juniper JUNOS 10.1 - S 5-13-2010, Руководство по выпуску

"Juniper JUNOS 10.1 - S 5-13-2010" - это последнее обновление программного обеспечения от Juniper Networks. В этом выпуске содержатся важные изменения и улучшения. Вы можете скачать бесплатное руководство по обновлению и использованию этого продукта на manualshive.com. Будьте в курсе всех нововведений с нашими Release Notes.

Поделиться
Скачать
background image

■

If the MSTP configuration contains a VLAN (under 

protocols mstp msti 

msti-id

)

that does not exist on the switch and you try to commit the configuration, the
commit will fail. Remove the VLAN from the MSTP configuration before you
perform an upgrade.

■

In the 

interfaces

 configuration stanza, if 

no-auto-negotiation

 is configured but

speed and link duplex settings are not configured under 

ether-options

 and you

try to commit the configuration, the commit will fail. If 

no-auto-negotiation

 is

configured under 

ether-options

, you must configure speed and link duplex settings.

■

In the 

ethernet-switching-options

 configuration, if 

action

 is not configured for the

number of MAC addresses allowed on the interface (under 

secure-access-port

interface 

interface-name

 mac-limit

 in the CLI or in the Port Security Configuration

page in the J-Web interface), and you try to commit the configuration, the commit
will fail. You must configure an action for the MAC address limit before upgrading
from Release 9.2 to Release 10.1.

■

If you have configured a tagged interface on logical interface 0 (unit 0), configure
a tagged interface on a logical interface other than unit 

0

 before upgrading from

Release 9.2 to Release 10.1. If you have not done this and you try to commit
the configuration, the commit will fail. Beginning with JUNOS Release 9.3 for EX
Series switches, untagged packets, BPDUs (such as in LACP and STP), and
priority-tagged packets are processed on logical interface 0 and not on logical
interface 32767. In addition, if you have not configured any untagged interfaces,
the switch creates a default logical interface 0.

■

On EX4200 switches, if you have installed advanced licenses for features such
as BGP, rename the 

/config/license

 directory to 

/config/.license_priv

 before

upgrading from Release 9.2 to Release 9.3 or later. If the switch does not have
a 

/config/license

 directory, create the 

/config/.license_priv

 directory manually

before you upgrade. If you do not rename the 

/config/license

 directory or create

the 

/config/.license_priv

 directory manually, the licenses installed will be deleted

after you upgrade from Release 9.2 to Release 9.3 or later.

Downgrading from JUNOS Release 10.1 to Release 9.2 for EX4200
Switches

When you downgrade a Virtual Chassis configuration from JUNOS Release 10.1 to
Release 9.2 for EX Series switches, member switches might not retain the mastership
priorities that had been configured previously. To restore the previously configured
mastership priorities, commit the configuration by issuing the 

commit

 command.

Related Topics

■

New Features in JUNOS Release 10.1 for EX Series Switches on page 184

■

Changes in Default Behavior and Syntax in JUNOS Release 10.1 for EX Series
Switches on page 187

■

Limitations in JUNOS Release 10.1 for EX Series Switches on page 188

■

Outstanding Issues in JUNOS Release 10.1 for EX Series Switches on page 191

200

■

Upgrade and Downgrade Issues for JUNOS Release 10.1 for EX Series Switches

JUNOS 10.1 Software Release Notes

Содержание JUNOS 10.1 - S 5-13-2010













































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOS 10.1 - S 5-13-2010

F-SECURE ANTI-VIRUS FOR MIMESWEEPER - Administrator'S Manual preview
ANTI-VIRUS FOR MIMESWEEPER -
Бренд: F-SECURE Страницы: 44
Q-See Remote Client Software V 4.0.1 User Manual preview
Remote Client Software V 4.0.1
Бренд: Q-See Страницы: 72
Red Hat NETWORK ENTERPRISE - USER 2.2 User Reference Manual preview
NETWORK ENTERPRISE - USER 2.2
Бренд: Red Hat Страницы: 104
CA BABWBN2900E20 - BRIGHTSTOR ARC BACKUP V9... Manual preview
BABWBN2900E20 - BRIGHTSTOR ARC BACKUP V9...
Бренд: CA Страницы: 69
ZixCorp PocketScriptTM User Manual preview
PocketScriptTM
Бренд: ZixCorp Страницы: 44
NeatWorks TV708LL/A - NeatWorks For Mac Using Manual preview
TV708LL/A - NeatWorks For Mac
Бренд: NeatWorks Страницы: 33
MACROMEDIA DREAMWEAVER 8-EXTENDING DREAMWEAVER Manual preview
DREAMWEAVER 8-EXTENDING DREAMWEAVER
Бренд: MACROMEDIA Страницы: 504
Blackberry WINDOWS LIVE MESSENGER - LEARN MORE User Manual preview
WINDOWS LIVE MESSENGER - LEARN MORE
Бренд: Blackberry Страницы: 18
FARONICS DEVICE FILTER MAC Manual preview
DEVICE FILTER MAC
Бренд: FARONICS Страницы: 30
Nortel CallPilot 5.0 Quick Start Manual preview
CallPilot 5.0
Бренд: Nortel Страницы: 66
EVGA PCoIP Technology User Manual preview
PCoIP Technology
Бренд: EVGA Страницы: 27
Applied Biosystems Data Explorer 4 Series User Manual preview
Data Explorer 4 Series
Бренд: Applied Biosystems Страницы: 447
Autodesk 24108-051462-9000 - AUTOCAD REVIT ARCH STE 08 COMM NEW SLM DVD Questions And Answers preview
24108-051462-9000 - AUTOCAD REVIT ARCH STE 08 COMM NEW SLM DVD
Бренд: Autodesk Страницы: 11
Autodesk 057A1-05A111-10MD - AutoCAD LT 2009 Manual preview
057A1-05A111-10MD - AutoCAD LT 2009
Бренд: Autodesk Страницы: 31
Autodesk 12909-091452-9750 - Map 3D 2006 Student Edition Installation Manual preview
12909-091452-9750 - Map 3D 2006 Student Edition
Бренд: Autodesk Страницы: 35
Autodesk 057A1-05A111-10MB - AutoCAD LT 2009 Installation Manual preview
057A1-05A111-10MB - AutoCAD LT 2009
Бренд: Autodesk Страницы: 58
FieldServer FS-8700-64 Driver Manual preview
FS-8700-64
Бренд: FieldServer Страницы: 22
Autodesk AUTOCAD MAP 3D Brochure preview
AUTOCAD MAP 3D
Бренд: Autodesk Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды