manualshive.com logo in svg

Juniper JUNOS 10.1 - S 5-13-2010, Руководство по выпуску

"Juniper JUNOS 10.1 - S 5-13-2010" - это последнее обновление программного обеспечения от Juniper Networks. В этом выпуске содержатся важные изменения и улучшения. Вы можете скачать бесплатное руководство по обновлению и использованию этого продукта на manualshive.com. Будьте в курсе всех нововведений с нашими Release Notes.

Поделиться
Скачать
background image

The following upgrade methods format the internal media before installation:

■

Installation from the boot loader using a TFTP server

■

Installation from the boot loader using a USB storage device

■

Installation from the CLI using the special 

partition

 option (available in JUNOS

Release 10.1)

The following upgrade methods retain the existing partitioning scheme:

■

Installation using the CLI

■

Installation using J-Web

WARNING:

Upgrade methods that format the internal media before installation wipe

out the existing contents of the media. Only the current configuration will be
preserved. Any important data should be backed up before starting the process.

NOTE:

Once the media has been formatted with the dual-root partitioning scheme,

you can use conventional CLI or J-Web installation methods, which retain the existing
partitioning and contents of the media, for subsequent upgrades.

Upgrading to JUNOS Release 10.1 Without Transitioning to Dual-Root Partitioning

If dual-root partitioning is not desired, use the conventional CLI and J-Web installation
methods, as described in the 

JUNOS Software Administration Guide for Security Devices

.

Upgrading to JUNOS Release 10.1 with Dual-Root Partitioning

To format the media with dual-root partitioning while upgrading to JUNOS Release
10.1, use one of the following installation methods:

■

Installation from the boot loader using a TFTP server. This method is preferable
if console access to the system is available and a TFTP server is available in the
network.

■

Installation from the boot loader using a USB storage device. This method is
preferable if console access to the system is available and the system can be
physically accessed to plug in a USB storage device.

■

Installation from CLI using the special 

partition

 option. This method is

recommended only when console access is not available. This installation can
be performed remotely.

NOTE:

After upgrading to JUNOS Release 10.1, the U-boot and boot loader must be

upgraded for the dual-root partitioning scheme to work properly.

Dual-Root Partitioning Scheme Documentation for SRX Series Services Gateways

■

175

Dual-Root Partitioning Scheme Documentation for SRX Series Services Gateways

Содержание JUNOS 10.1 - S 5-13-2010













































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOS 10.1 - S 5-13-2010

VMware vSphere 4 Architecture And Performance preview
vSphere 4
Бренд: VMware Страницы: 19
NeatWorks TV708LL/A - NeatWorks For Mac Using Manual preview
TV708LL/A - NeatWorks For Mac
Бренд: NeatWorks Страницы: 33
Primera PrimoDVD User Manual preview
PrimoDVD
Бренд: Primera Страницы: 19
Patton electronics SmartNode Series Software Configuration Manual preview
SmartNode Series
Бренд: Patton electronics Страницы: 655
Nokia PC Suite 6.7 User Manual preview
PC Suite 6.7
Бренд: Nokia Страницы: 29
Nokia NetMonitor Manual preview
NetMonitor
Бренд: Nokia Страницы: 29
Nokia N71 Service Manual preview
N71
Бренд: Nokia Страницы: 35
Nokia NPS6113000 - Secure Access System Getting Started Manual preview
NPS6113000 - Secure Access System
Бренд: Nokia Страницы: 48
Nokia N73 - Smartphone 42 MB Service Manual & Parts Manual preview
N73 - Smartphone 42 MB
Бренд: Nokia Страницы: 354
Nokia N73 - Smartphone 42 MB User Manual preview
N73 - Smartphone 42 MB
Бренд: Nokia Страницы: 265
Nokia Network Voyager Reference Manual preview
Network Voyager
Бренд: Nokia Страницы: 700
Samsung SyncMaster S23A950D User Manual preview
SyncMaster S23A950D
Бренд: Samsung Страницы: 90
Samsung SyncMaster T23A750 E-Manual preview
SyncMaster T23A750
Бренд: Samsung Страницы: 292
Red Hat CERTIFICATE SYSTEM 7.2 - AGENT GUIDE Manual preview
CERTIFICATE SYSTEM 7.2 - AGENT GUIDE
Бренд: Red Hat Страницы: 73
Avaya NN44400-120 User Manual preview
NN44400-120
Бренд: Avaya Страницы: 48
Symantec BACKUP EXEC 11D Quick Installation Manual preview
BACKUP EXEC 11D
Бренд: Symantec Страницы: 18
Symantec ALTIRIS IT MANAGEMENT SUITE 7.0 MR2 - S Release Note preview
ALTIRIS IT MANAGEMENT SUITE 7.0 MR2 - S
Бренд: Symantec Страницы: 14
Symantec ALTIRIS DEPLOYMENT SOLUTION 7.1 Manual preview
ALTIRIS DEPLOYMENT SOLUTION 7.1
Бренд: Symantec Страницы: 90

Бренды по названию

Популярные бренды

Загрузить еще бренды