workaround, configure both sides in the link-discovery mode as “active.”
[PR/490886: This issue has been resolved.]
■
On the IEEE 802.1ag CFM, when the loss threshold is configured to 256, it
displays a '0.' [PR/491422: This issue has been resolved.]
■
Whenever the system gets busy, the master Routing Engine might relinquish
mastership and take the line cards offline soon after. [PR/491583: This issue has
been resolved.]
■
The CI logical interface state may go out of sync when OAM is configured and
the logical interface flaps due to OAM. [PR/491866: This issue has been resolved.]
■
The
chassis cell relay
mode might not be set properly for CI interfaces.
[PR/492197: This issue has been resolved.]
■
The DPC remains in the ready state and the demux0 interface remains in a down
state after a chassisd restart without graceful Routing Engine switchover enabled.
[PR/492961: This issue has been resolved.]
■
When an SCB with an active plane is powered down, an HSL link error occurs
on unrelated SCBs. [PR/493151: This issue has been resolved.]
■
The CLI does not respond when c is entered at the "more” separator.
[PR/493881: This issue has been resolved.]
■
The system may generate a core file when the DPC is removed before it is taken
offline. [PR/494625: This issue has been resolved.]
■
An outer virtual LAN tag is not added in a provider edge-customer edge link when
VPLS traffic arrives with an MPLS value of 2, 3, 4, or 5. However, VPLS traffic
with a value of 0, 1, 6, or 7 does not have this issue. [PR/495555: This issue has
been resolved.]
■
When ilmid uses a large amount of memory, the following error message displays:
“/kernel: Process (1702,ilmid) has exceeded 85% of RLIMIT_DATA: used 129084
KB Max 131072 KB.” [PR/495645: This issue has been resolved.]
■
The one-port OC12-3 PIC cannot support eight queues when the
no-concatenate
option is configured. [PR/499452: This issue has been resolved.]
■
When an F4 OAM is enabled for a VPI and the encaps for a unit are changed
using that VPI and VCI to ATM-CCC cell rrelay, followed by the deletion of the
logical interface, the VPI list might be corrupted . Any subsequent change can
cause the system to crash. [PR/499479: This issue has been resolved.]
■
On a 4–port ChOC3/STM1 and 12–port T1/E1 circuit emulation PICs, the ATM
logical interface packets counter does not increment if the PIC is configured in
the ATM IMA mode. [PR/500153: This issue has been resolved.]
■
When
t1-options
are configured at the
[edit interfaces ct1-x/y/z]
hierarchy level,
some ct1 interfaces of a 10xCHT1 IQ PIC might flap when the configuration
changes are committed. As a workaround, remove the
t1-options
. [PR/500820:
This issue has been resolved.]
■
Polling
ifInOctets
on Gigabit Ethernet IQ PIC VLANs might momentarily return a
higher value. [PR/500852: This issue has been resolved.]
■
On 40x1 Gigabit Ethernet PICs, very short fragments of fragmented TCP, UDP,
and ICMP packets may be incorrectly dropped with the diagnostic L4 length too
short. [501526: This issue has been resolved.]
Issues in JUNOS Release 10.1 for M Series, MX Series, and T Series Routers
■
77
Issues in JUNOS Release 10.1 for M Series, MX Series, and T Series Routers
