manualshive.com logo in svg

Juniper JUNOS 10.1 - S 5-13-2010, Руководство по выпуску

"Juniper JUNOS 10.1 - S 5-13-2010" - это последнее обновление программного обеспечения от Juniper Networks. В этом выпуске содержатся важные изменения и улучшения. Вы можете скачать бесплатное руководство по обновлению и использованию этого продукта на manualshive.com. Будьте в курсе всех нововведений с нашими Release Notes.

Поделиться
Скачать
background image

User Interface and Configuration ......................................................38

Changes in Default Behavior and Syntax in JUNOS Release 10.1 for M

Series, MX Series, and T Series Routers ............................................42
Class of Service ................................................................................42
Forwarding and Sampling ................................................................42
Interfaces and Chassis ......................................................................42
Layer 2 Ethernet Services .................................................................46
MPLS Applications ............................................................................46
Multiplay ..........................................................................................47
Routing Policy and Firewall Filters ....................................................47
Routing Protocols .............................................................................47
Services Applications ........................................................................48
Subscriber Access Management .......................................................50
User Interface and Configuration ......................................................51
VPNs ................................................................................................52

Issues in JUNOS Release 10.1 for M Series, MX Series, and T Series

Routers .............................................................................................54
Current Software Release .................................................................54
Previous Releases .............................................................................73

Errata and Changes in Documentation for JUNOS Software Release 10.1

for M Series, MX Series, and T Series Routers ..................................86
Changes to the JUNOS Documentation Set .......................................86
Errata ...............................................................................................86

Upgrade and Downgrade Instructions for JUNOS Release 10.1 for M

Series, MX Series, and T Series Routers ............................................89
Basic Procedure for Upgrading to Release 10.1 ................................90
Upgrading a Router with Redundant Routing Engines ......................92
Upgrading Juniper Routers Running Draft-Rosen Multicast VPN to

JUNOS Release 10.1 ...................................................................92

Upgrading the Software for a Routing Matrix ...................................94
Upgrading Using ISSU .......................................................................95
Upgrading from JUNOS Release 9.2 or Earlier on a Router Enabled

for Both PIM and NSR ................................................................95

Downgrade from Release 10.1 .........................................................96

JUNOS Software Release Notes for Juniper Networks SRX Series Services

Gateways and J Series Services Routers ..................................................98
New Features in JUNOS Release 10.1 for SRX Series Services Gateways

and J Series Services Routers ............................................................98
Software Features .............................................................................99
Hardware Features .........................................................................117

Changes In Default Behavior and Syntax in JUNOS Release 10.1 for SRX

Series Services Gateways and J Series Services Routers ..................117
Application Layer Gateways (ALGs) ................................................118
Chassis Cluster ...............................................................................118
Command-Line Interface (CLI) ........................................................119
Configuration .................................................................................122
Flow and Processing .......................................................................123
Interfaces and Routing ...................................................................124
Intrusion Detection and Prevention (IDP) .......................................124
J-Web .............................................................................................125
Management and Administration ...................................................125

2

■

JUNOS 10.1 Software Release Notes

Содержание JUNOS 10.1 - S 5-13-2010













































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOS 10.1 - S 5-13-2010

Canon PowerShot SD10 Digital ELPH Software Starter Manual preview
PowerShot SD10 Digital ELPH
Бренд: Canon Страницы: 124
Tandberg Data IBM LOTUS NOTES-DOMINO V 11.3 - INSTALLATION AND ... Integration Manual preview
IBM LOTUS NOTES-DOMINO V 11.3 - INSTALLATION AND ...
Бренд: Tandberg Data Страницы: 49
MACROMEDIA COLDFUSION 5-DEVELOPING Develop Manual preview
COLDFUSION 5-DEVELOPING
Бренд: MACROMEDIA Страницы: 438
Minolta DIMAGE VIEWER 2.1 Instruction Manual preview
DIMAGE VIEWER 2.1
Бренд: Minolta Страницы: 84
Symantec WISE INSTALLATION EXPRESS 7.0 SP2 Getting Started Manual preview
WISE INSTALLATION EXPRESS 7.0 SP2
Бренд: Symantec Страницы: 50
Pioneer CNSD-239FM Upgrade Instructions And Operation Manual Addendum preview
CNSD-239FM
Бренд: Pioneer Страницы: 28
Pioneer CNSD-230FM Upgrade Instructions And Operation Manual Addendum preview
CNSD-230FM
Бренд: Pioneer Страницы: 28
FieldServer FS-8704-01 Driver Manual preview
FS-8704-01
Бренд: FieldServer Страницы: 12
TRENDnet VIP-L16 - Configuration Manual preview
VIP-L16 -
Бренд: TRENDnet Страницы: 41
Promise Technology dc5750 - Microtower PC User Manual preview
dc5750 - Microtower PC
Бренд: Promise Technology Страницы: 114
AVG ANTI-VIRUS 9 FREE - REV 90.15 User Manual preview
ANTI-VIRUS 9 FREE - REV 90.15
Бренд: AVG Страницы: 146
Genius NAVIGATOR 380 - Quick Start Manual preview
NAVIGATOR 380 -
Бренд: Genius Страницы: 26
MACROMEDIA COLDFUSION MX 61-DEVELOPING COLDFUSION MX Develop Manual preview
COLDFUSION MX 61-DEVELOPING COLDFUSION MX
Бренд: MACROMEDIA Страницы: 860
MACROMEDIA FIREWORKS 8-USING FIREWORKS Use Manual preview
FIREWORKS 8-USING FIREWORKS
Бренд: MACROMEDIA Страницы: 472
IBM Terminal Emulation TN5250 User Manual preview
Terminal Emulation TN5250
Бренд: IBM Страницы: 51
Omron CX-POSITIO Specifications preview
CX-POSITIO
Бренд: Omron Страницы: 2
Omron CX-PROCESS Brochure preview
CX-PROCESS
Бренд: Omron Страницы: 7
Omron CX-MOTION Specifications preview
CX-MOTION
Бренд: Omron Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды