manualshive.com logo in svg

Juniper JUNOS 10.1 - S 5-13-2010, Руководство по выпуску

"Juniper JUNOS 10.1 - S 5-13-2010" - это последнее обновление программного обеспечения от Juniper Networks. В этом выпуске содержатся важные изменения и улучшения. Вы можете скачать бесплатное руководство по обновлению и использованию этого продукта на manualshive.com. Будьте в курсе всех нововведений с нашими Release Notes.

Поделиться
Скачать
background image

WXC Integrated Services Module

■

When two J Series devices with WXC Integrated Services Modules (WXC ISM
200s) installed are configured as peers, traceroute fails if 

redirect-wx

 is configured

on both peers. [PR/227958]

■

On J6350 devices, JUNOS Software does not support policy-based VPN with WXC
Integrated Services Modules (WXC ISM 200s). [PR/281822]

Resolved Issues in JUNOS Release 10.1 for SRX Series Services Gateways
and J Series Services Routers

The following issues from JUNOS Release 10.0 R1 have been resolved with this
release. The identifier following the description is the tracking number in our bug
database.

Authentication

■

On SRX3400, SRX3600, SRX5600, and SRX5800 devices, when a firewall
authentication session was initiated, the authentication entry was created on all
the SPUs. However, in JUNOS Release 10.1 when multiple firewall authentication
sessions were initiated by the same user simultaneously, authentication entries
were not created in all the SPUs. As a result, some sessions timed out, and the
user had to reconnect or retry to reach the server. [PR/475706: This issue has
been resolved.]

Chassis Cluster

■

On SRX3400 and SRX3600 devices in a chassis cluster, ESP authentication errors
occurred while traffic was sent through 4000 site-to-site IPsec tunnels.
[PR/426073: This issue has been resolved.]

■

On SRX650 and J Series devices, doing a redundancy group 0 failover with 1000
logical interfaces on the 

reth

 interface caused replication errors. As a result, the

ksyncd

 process generated a core file. [PR/428636: This issue has been resolved.]

■

On SRX5600 and SRX5800 devices in a chassis cluster, whenever the 

reth

interface with static MAC address was configured, the ping operation failed from
the directly connected device to the chassis cluster. [PR/455051: This issue has
been resolved.]

■

On SRX3400, SRX3600, SRX5600, and SRX5800 devices, the track IP did not
display the correct status if the 

ip-monitor

 configuration was under RG0.

[PR/482556: This issue has been resolved.]

■

On SRX Series devices configured in a chassis cluster, the following informative
messages were erroneously displayed during failover, possibly creating the
incorrect impression that errors had occurred:

■

l2ha_set_rg_state: Setting rg state for 1 (MASTER)

■

l2ha_set_rg_state: Setting rg state for 1 (BACKUP)

[PR/498010: This issue has been resolved.]

158

■

Issues in JUNOS Release 10.1 for SRX Series Services Gateways and J Series Services Routers

JUNOS 10.1 Software Release Notes

Содержание JUNOS 10.1 - S 5-13-2010













































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOS 10.1 - S 5-13-2010

On-Q/Legrand DA7559 User Manual preview
DA7559
Бренд: On-Q/Legrand Страницы: 14
M-Audio Afro-Cuban Percussion Quick Start Manual preview
Afro-Cuban Percussion
Бренд: M-Audio Страницы: 5
F-SECURE CLIENT SECURITY 9.00 - QUICK Quick Installation Manual preview
CLIENT SECURITY 9.00 - QUICK
Бренд: F-SECURE Страницы: 32
AMX Modero ViewPoint MVP-5100 Operation/Reference Manual preview
Modero ViewPoint MVP-5100
Бренд: AMX Страницы: 190
Euphonix MixView 3.0 Overview preview
MixView 3.0
Бренд: Euphonix Страницы: 8
TC Electronic VSS3 Manual preview
VSS3
Бренд: TC Electronic Страницы: 22
NETGEAR 7200 Series User Manual preview
7200 Series
Бренд: NETGEAR Страницы: 282
Avaya PARTNER ACS PC Administration Getting Started Manual preview
PARTNER ACS PC Administration
Бренд: Avaya Страницы: 56
Avaya P120 SMON User Manual preview
P120 SMON
Бренд: Avaya Страницы: 61
Red Hat APPLICATION STACK 2.2 RELEASE Release Note preview
APPLICATION STACK 2.2 RELEASE
Бренд: Red Hat Страницы: 22
F-SECURE ANTI-VIRUS FOR MICROSOFT EXCHANGE 9.00 Administrator'S Manual preview
ANTI-VIRUS FOR MICROSOFT EXCHANGE 9.00
Бренд: F-SECURE Страницы: 174
Fiery Fiery EX2101 Job Management Manual preview
Fiery EX2101
Бренд: Fiery Страницы: 214
F-SECURE POLICY MANAGER PROXY 2.0 - Administrator'S Manual preview
POLICY MANAGER PROXY 2.0 -
Бренд: F-SECURE Страницы: 24
Oracle WebLogic JSR-170 Adapter Supported Configurations preview
WebLogic JSR-170 Adapter
Бренд: Oracle Страницы: 6
Qlogic Data Migration Service User Manual preview
Data Migration Service
Бренд: Qlogic Страницы: 162
Qlogic SANsurfer FC HBA Manager Application User Manual preview
SANsurfer FC HBA Manager Application
Бренд: Qlogic Страницы: 218
MACROMEDIA 38000382 - Macromedia JRun - Mac Getting Started Manual preview
38000382 - Macromedia JRun - Mac
Бренд: MACROMEDIA Страницы: 132
Canon VB-M40 Administrator'S Manual preview
VB-M40
Бренд: Canon Страницы: 104

Бренды по названию

Популярные бренды

Загрузить еще бренды