manualshive.com logo in svg

Juniper JUNOS 10.1 - S 5-13-2010, Руководство по выпуску

"Juniper JUNOS 10.1 - S 5-13-2010" - это последнее обновление программного обеспечения от Juniper Networks. В этом выпуске содержатся важные изменения и улучшения. Вы можете скачать бесплатное руководство по обновлению и использованию этого продукта на manualshive.com. Будьте в курсе всех нововведений с нашими Release Notes.

Поделиться
Скачать
background image

■

On SRX5600 devices, low-impact in-service software upgrade (ISSU) chassis
cluster upgrade does not succeed with the 

no-old-master-upgrade

 option when

you upgrade from JUNOS Release 9.6R2 to JUNOS Release 10.1. [PR/471235]

■

On SRX3400, SRX3600, SRX5600, and SRX5800 devices, the secondary node
displays incorrect interface status after a low-impact in-service software upgrade
(ISSU) from JUNOS Release 9.6R2 to JUNOS Release 10.1R1. [PR/482566]

■

On SRX3400 and SRX3600 devices, chassis cluster upgrades (LICU) with
no-old-master-upgrade from JUNOS Release 9.6R2.11 to 10.0R1.x and from
JUNOS Release 10.0R1.8 to 10.1x.x do not work. [PR/483485]

■

On SRX5600 devices with an active/active chassis cluster configuration, under
stress conditions, memory pointers of the 

appid

 module could be inappropriately

assigned. This might cause memory corruption. [PR/483522]

■

On SRX3600 devices, after you disable and enable the secondary node track,
the IP status remains unreachable. [PR/488890]

■

On SRX5600, SRX5800 devices, the shaping rate doubles during LICU upgrades
after the secondary node becomes the primary node and continues to be the
same doubled value after LICU, when the LICU upgrade is performed for JUNOS
Release 10.0R2 to 10.1R2.[PR/491834]

■

On SRX5600 and SRX5800 devices, the shaping rate is not honored during LICU
upgrades. During LICU upgrades, when the secondary node is upgraded to the
primary node, the shaping rate is doubled and continues to be the same doubled
value after the LICU upgrade is finished. [PR/499481]

Class of Service (CoS)

■

J4350 and J6350 devices might not have the requisite data buffers needed to
meet expected delay-bandwidth requirements. Lack of data buffers might degrade
CoS performance with smaller-sized (500 bytes or less) packets. [PR/73054]

■

On J Series devices, with a CoS configuration, when you try to delete all the flow
sessions using the 

clear security flow session

 command, the WXC application

acceleration platform might fail over with heavy traffic. [PR/273843]

■

On SRX Series devices, class-of-service-based forwarding (CBF) does not work.
[PR/304830]

■

On SRX3400, SRX3600, SRX5600, and SRX5800 devices, when you change the
scheduler type on the Layer 2 aggregated Ethernet interface, the 

clear interface

statistics

 command does not work for the aggregated Ethernet bundle.

[PR/485904]

Issues in JUNOS Release 10.1 for SRX Series Services Gateways and J Series Services Routers

■

141

Issues in JUNOS Release 10.1 for SRX Series Services Gateways and J Series Services Routers

Содержание JUNOS 10.1 - S 5-13-2010













































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOS 10.1 - S 5-13-2010

Altigen AltiWare OE 4.6 Administration Manual preview
AltiWare OE 4.6
Бренд: Altigen Страницы: 518
Intergraph InterSite Quick Start Manual preview
InterSite
Бренд: Intergraph Страницы: 46
IBM E16RMLL-I - Tivoli Storage Manager Implementation Manual preview
E16RMLL-I - Tivoli Storage Manager
Бренд: IBM Страницы: 828
Mitsubishi Gpredict 1.2 User Manual preview
Gpredict 1.2
Бренд: Mitsubishi Страницы: 64
DigiDesign Focusrite d2 Manual preview
Focusrite d2
Бренд: DigiDesign Страницы: 39
Avaya one-X Deskphone Edition Installation And Maintenance Manual preview
one-X Deskphone Edition
Бренд: Avaya Страницы: 74
JETWAY MAGICTWIN XP Software Install Manual preview
MAGICTWIN XP
Бренд: JETWAY Страницы: 43
Venstar Skyport Communications Installation Instructions Manual preview
Skyport Communications
Бренд: Venstar Страницы: 41
Yamaha Faders Owner'S Manual preview
Faders
Бренд: Yamaha Страницы: 5
Yamaha Extension Installation Manual preview
Extension
Бренд: Yamaha Страницы: 5
Yamaha Extension Owner'S Manual preview
Extension
Бренд: Yamaha Страницы: 6
Yamaha Drum Pad Owner'S Manual preview
Drum Pad
Бренд: Yamaha Страницы: 14
Yamaha CobraNet MY16-CII Owner'S Manual preview
CobraNet MY16-CII
Бренд: Yamaha Страницы: 21
Yamaha CobraNet Manager Lite Owner'S Manual preview
CobraNet Manager Lite
Бренд: Yamaha Страницы: 22
Yamaha DX200 Editor Owner'S Manual preview
DX200 Editor
Бренд: Yamaha Страницы: 82
KINGDOM COMPUTER OPERATED VIDEO CAMERA SYSTEM Installation & User Manual preview
COMPUTER OPERATED VIDEO CAMERA SYSTEM
Бренд: KINGDOM Страницы: 21
YASKAWA XTRAWARE - V3.0 Manual preview
XTRAWARE - V3.0
Бренд: YASKAWA Страницы: 263
10ZiG Technology Limited RBT Series Configuration Manual preview
RBT Series
Бренд: 10ZiG Technology Limited Страницы: 125

Бренды по названию

Популярные бренды

Загрузить еще бренды