interface. If you do not configure a bandwidth for the logical interface, it is
automatically set to the bandwidth configured for the physical interface.
[
Network Interfaces
]
■
Support for line-rate mode on 10-port 10-Gigabit Oversubscribed Ethernet
(OSE) PIC (T640, T1600, TX Matrix Plus platforms)
— Enables you to configure
the T640, T1600, and TX Matrix Plus routers to operate the 10-port 10-Gigabit
OSE PIC in line-rate mode, in which the OSE PIC disables oversubscription and
operates in line-rate mode. By default, the 10-port 10-Gigabit OSE PIC operates
in 2:1 oversubscription mode.
[
System Basics
]
■
New
CoS information
field added to the
show interfaces extensive
command
output
—The output of the
show interfaces extensive
command now displays the
class-of-service queue allocation information of the physical interfaces (intelligent
queueing PICs such as IQ2 and so on) under the new class-of-service information
category. In the previous releases, the class-of-service queue allocation
information for physical interfaces was listed within the
Packet Forwarding Engine
configuration
category:
host@user#
show interfaces extensive ge-7/1/3
Packet Forwarding Engine configuration:
Destination slot: 7
CoS information:
Direction : Output
CoS transmit queue Bandwidth Buffer Priority
Limit
% bps % usec
0 best-effort 95 950000000 95 0
low none
3 network-control 5 50000000 5 0
low none
Direction : Input
CoS transmit queue Bandwidth Buffer Priority
Limit
% bps % usec
0 best-effort 95 950000000 95 0
low none
3 network-control 5 50000000 5 0
low none
[
Interfaces Command Reference
]
■
Restriction on compatibility-mode adtran and verilink
—On 2-port and 4-port
channelized DS3 (T3) IQ interfaces, you cannot configure
compatibility-mode
adtran
, or
verilink
at the
[edit interfaces
interface-name
t3-options]
hierarchy level.
If configured, the default mode is applied on both the interfaces, that is, no
subrating.
[
Network Interfaces
]
■
Support for internal clocking mode on OSE PICs
—The 10-port 10-Gigabit
Oversubscribed Ethernet (OSE) PIC supports only internal clocking mode on its
ports.
Changes in Default Behavior and Syntax in JUNOS Release 10.1 for M Series, MX Series, and T Series Routers
■
43
Changes in Default Behavior and Syntax in JUNOS Release 10.1 for M Series, MX Series, and T Series Routers
