20 21
[
System Basics Command Reference
]
■
Modification to the output of the
show interfaces extensive
command
output
—For IQ2E interfaces, the
show interfaces extensive
command output no
longer displays the
schedulers
field, because there is no static scheduler
partitioning of schedulers among different ports in IQ2E.
[
Interfaces Command Reference
]
■
Enhancement to the
show chassis sibs
command
—The
show chassis sibs
command now displays destination errors for SIBS in the
Check
state. In JUNOS
Release 10.1 and later and JUNOS Release 9.6 and 10.0, the command displays
the number of destination errors for SIBS in the
Check
state:
user@host>
show chassis sibs
Slot State Uptime
0 Empty
1 Empty
2 Check (21 destination errors) 1 day, 1 hour, 32 minutes,
55 seconds
3 Check (0 destination errors) 1 day, 1 hour, 32 minutes,
45 seconds
4 Empty
use "show chassis fabric fpcs" to determine which PFEs have destination
errors
However, for JUNOS Release 9.3 and 9.5, the command only displays the message
destination errors
or
no destination errors
for a SIB that is in the
Check
state, but
does not display the number of destination errors:
user@host>
show chassis sibs
Slot State Uptime
0 Empty
1 Empty
2 Check (destination errors) 1 day, 1 hour, 32 minutes,
55 seconds
3 Check (no destination errors) 1 day, 1 hour, 32 minutes,
45 seconds
4 Empty
use "show chassis fabric fpcs" for more details
In addition, the command also displays a message to use the
show chassis fabric
fpcs
command for more information about the destination errors.
If there are no SIBs in the
Check
state, there is no change in the output of this
command.
Changes in Default Behavior and Syntax in JUNOS Release 10.1 for M Series, MX Series, and T Series Routers
■
45
Changes in Default Behavior and Syntax in JUNOS Release 10.1 for M Series, MX Series, and T Series Routers
