■
On J-Web, the error message: “Fatal error: Allowed memory size..." displays
when the Interfaces tab is selected. This message also displays when the
Interfaces tab under Class-of-Service is selected. [PR/495825]
■
The group inherited configuration under the
interface-range
hierarchy level does
not take effect. [PR/522872]
VPNs
■
When you modify the
frame-relay-tcc
statement at the
[edit interfaces
interface-name
unit
logical-unit-number
]
hierarchy level of a Layer 2 VPN, the
connection for the second logical interface might not come up. As a workaround,
restart the chassis process (chassisd) or reboot the router. [PR/32763]
■
When you configure inter-AS VPLS with MAC processing at the autonomous
system (AS) boundary router along with multihoming, and if a designated
forwarding AS boundary router fails and then comes back up again, traffic flowing
to the local AS from the other AS’s boundary router might be lost. The loss occurs
in the time period (tenths of a second) during which the old designated forwarding
AS boundary router is taking back the role of designated forwarder. [PR/312730]
■
On a router configured for nonstop active routing (NSR) (the
nonstop-routing
statement is included at the
[edit routing-options]
hierarchy level), if a nonstop
active routing switchover occurs after the configuration for routing instances
changes in certain ways, the BGP sessions between PE and CE routers might not
be established after the switchover. [PR/399275]
■
On MX Series, M120, and new EIII FPCs on M320 routers, the ISO/Connectionless
Network Service (CLNS) packets over the translational cross-connect (TCC) are
dropped in the case of Frame Relay, even though the family TCC has been
configured to switch family iso on the Frame Relay interface. [PR/462052]
■
In
vlan-tagging
,
stacked-vlan-tagging
, and
flexible-vlan-tagging
modes, untagged
packets or mismatching Tag Protocol ID (TPID) packets may be dropped. These
dropped packets are not accounted for and are not visible in the CLI. This issue
is specific to the 10-port 10-Gigabit Oversubscribed Ethernet (OSE) PICs.
[PR/496190]
■
While upgrading JUNOS Software with l2circuit configuration underthe logical
systems, the validation might fail with an "interface version mismatch" error.
You can ignore this error and upgrade the JUNOS Software using the
no-validate
option. [PR/497190]
Resolved Issues in JUNOS Release 10.1 for M Series, MX Series, and T Series
Routers
Class of Service
■
The following operations may result in large incorrect queue statistics on IQ2
interfaces:
■
When the IQ2 PIC is restarted, or the interface is deactivated and reactivated,
while traffic is on and the configuration defines a high priority queue on the
interface.
Issues in JUNOS Release 10.1 for M Series, MX Series, and T Series Routers
■
65
Issues in JUNOS Release 10.1 for M Series, MX Series, and T Series Routers
