manualshive.com logo in svg

Juniper JUNOS 10.1 - S 5-13-2010, Руководство по выпуску

"Juniper JUNOS 10.1 - S 5-13-2010" - это последнее обновление программного обеспечения от Juniper Networks. В этом выпуске содержатся важные изменения и улучшения. Вы можете скачать бесплатное руководство по обновлению и использованию этого продукта на manualshive.com. Будьте в курсе всех нововведений с нашими Release Notes.

Поделиться
Скачать
background image

user@host# 

set security idp security-package automatic download-timeout

Range: 1 – 60 seconds
Default: 1 second

■

The 

JUNOS Software CLI Reference

 incorrectly states the 

show security idp status

and 

clear security idp status

 logs, whereas the logs should be as follows:

■

Correct 

show security idp status

 log

user@host> show security idp status
State of IDP: 2-default, Up since: 2010-02-04 13:37:16 UTC (17:15:02 ago)
Packets/second: 5 Peak: 11 @ 2010-02-05 06:51:58 UTC
KBits/second : 2 Peak: 5 @ 2010-02-05 06:52:06 UTC
Latency (microseconds): [min: 0] [max: 0] [avg: 0]
Packet Statistics:
[ICMP: 0] [TCP: 82] [UDP: 0] [Other: 0]
Flow Statistics: ICMP: [Current: 0] [Max: 0 @ 2010-02-05 06:49:51 UTC]
TCP: [Current: 2] [Max: 6 @ 2010-02-05 06:52:08 UTC]
UDP: [Current: 0] [Max: 0 @ 2010-02-05 06:49:51 UTC]
Other: [Current: 0] [Max: 0 @ 2010-02-05 06:49:51 UTC]
Session Statistics: [ICMP: 0] [TCP: 1] [UDP: 0] [Other: 0]
Policy Name : sample
Running Detector Version : 10.2.160091104

■

Correct 

clear security idp status

 log

user@host> clear security idp status
State of IDP: 2-default, Up since: 2010-02-04 13:37:16 UTC (17:13:45 ago)
Packets/second: 0 Peak: 0 @ 2010-02-05 06:49:51 UTC
KBits/second: 0 Peak: 0 @ 2010-02-05 06:49:51 UTC
Latency (microseconds): [min: 0] [max: 0] [avg: 0]
Packet Statistics: [ICMP: 0] [TCP: 0] [UDP: 0] [Other: 0]
Flow Statistics: ICMP: [Current: 0] [Max: 0 @ 2010-02-05 06:49:51 UTC]
TCP: [Current: 0] [Max: 0 @ 2010-02-05 06:49:51 UTC]
UDP: [Current: 0] [Max: 0 @ 2010-02-05 06:49:51 UTC]
Other: [Current: 0] [Max: 0 @ 2010-02-05 06:49:51 UTC]
Session Statistics: [ICMP: 0] [TCP: 0] [UDP: 0] [Other: 0]
Policy Name: sample
Running Detector Version: 10.2.160091104

■

The 

Verifying the Policy Compilation and Load Status

 section of the 

JUNOS

Software Security Configuration

 Guide has a missing empty/new line before

the 

IDPD Trace file

 heading, in the second sample output.

■

The 

JUNOS Software Security Configuration Guide

 incorrectly states that IDP

is not supported in transparent mode on SRX3400, SRX3600, SRX5600, and
SRX5800 devices. IDP is supported in transparent mode on those devices.

■

The IDP rule notification options listed in the 

JUNOS Software Security

Configuration Guide

 incorrectly include the 

Send Emails

 and 

Run Scripts

 options,

which are not supported in JUNOS Release 10.1.

Errata and Changes in Documentation for JUNOS Release 10.1 for SRX Series Services Gateways and J Series Services

Routers

■

169

Errata and Changes in Documentation for JUNOS Release 10.1 for SRX Series Services Gateways and J Series Services Routers

Содержание JUNOS 10.1 - S 5-13-2010













































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOS 10.1 - S 5-13-2010

KAPERSKY CORPORATE SUITE Manual preview
CORPORATE SUITE
Бренд: KAPERSKY Страницы: 36
FARONICS ANTI-EXECUTABLE ENTERPRISE Manual preview
ANTI-EXECUTABLE ENTERPRISE
Бренд: FARONICS Страницы: 68
ACRONIS DISK DIRECTOR SUITE 10 User Manual preview
DISK DIRECTOR SUITE 10
Бренд: ACRONIS Страницы: 127
Avaya IP Office CTI Link Programmer'S Manual preview
IP Office CTI Link
Бренд: Avaya Страницы: 28
Red Hat JBoss Developer Studio 3.0 User Reference Manual preview
JBoss Developer Studio 3.0
Бренд: Red Hat Страницы: 78
Acer ASM 7 Faq preview
ASM 7
Бренд: Acer Страницы: 32
Acer Altos RAIDWatch Manual preview
Altos RAIDWatch
Бренд: Acer Страницы: 212
Acer ASM Pro Installation Manual preview
ASM Pro
Бренд: Acer Страницы: 20
Acer eConsole User Manual preview
eConsole
Бренд: Acer Страницы: 33
Acer Destinator PN User Manual preview
Destinator PN
Бренд: Acer Страницы: 118
Red Hat CLUSTER SUITE - FOR RHEL 4 Overview preview
CLUSTER SUITE - FOR RHEL 4
Бренд: Red Hat Страницы: 74
Omron SYSMAC CX-Programmer 9 Operation Manual preview
SYSMAC CX-Programmer 9
Бренд: Omron Страницы: 232
Red Hat APPLICATION STACK 2.4 RELEASE Release Note preview
APPLICATION STACK 2.4 RELEASE
Бренд: Red Hat Страницы: 22
GRASS VALLEY AURORA INGEST 7 Datasheet preview
AURORA INGEST 7
Бренд: GRASS VALLEY Страницы: 4
GRASS VALLEY Aurora Browse Upgrade Instructions preview
Aurora Browse
Бренд: GRASS VALLEY Страницы: 42
FieldServer FS-8707-06 Driver Manual preview
FS-8707-06
Бренд: FieldServer Страницы: 15
FARONICS DEEP FREEZE - SMS INTEGRATION 8-2006 Manual preview
DEEP FREEZE - SMS INTEGRATION 8-2006
Бренд: FARONICS Страницы: 10
UMAX Technologies PowerColor User Manual preview
PowerColor
Бренд: UMAX Technologies Страницы: 127

Бренды по названию

Популярные бренды

Загрузить еще бренды