John Bean BFH 2000, Руководство оператора

Страница: 66 / 264

66 BFH 2000
Radangaben zu erfassen
1
2
4
3
6-9
6.5 Gauge calibration
Nota :
The Gauge should be used to measure the wheel-
machine distance only in MANUAL Mode.
The internal Gauge is used only to measure the distance
between machine and wheel (
Ofset ).
Fig. 7-1 Internal Gauge calibration for rim distance.
1 Internal gauge with gauge head
2 Gauge head (feeler)
3 Telescoping point to read the distance X
4 Graduated scale.
Figure 7-18
Determining the distance by measuring with gauge arm.
Application :

position the Gauge Head on the rim, in the exact point
shown in the "Gauge Position" chapter.

Read the distance value on the graduated scale of the
rod, at the Telescoping point.

Recall the Rim Data Input function in the Menu and
proceed as shown in the 7.3.3.2 "Rim/machine
distance input" chapter.
The Gauge calibration is used to determine the
exact distance. Entering the distance manually
excludes the use of the
EasyAlu function .
7-18