Jeep GLADIATOR 2023 Скачать руководство пользователя

Страница: 86 / 420

GETTING TO KNOW YOUR VEHICLE

3. From inside the vehicle, pull the handle on the header

latch downward to engage the hook into its receiver.

Step Three

4. Pull the handle back upward while squeezing the

hook, locking the latch into place.

Step Four

5. Repeat steps three and four on the other side.

Installing The Rear Window And Quarter

Panel Cover Assemblies

NOTE:

Both quarter panel cover assemblies and the rear window

must ALL be removed together, or installed together.
If the rear window and quarter panel cover assemblies

were previously removed, proceed as follows to install:
1. Guide the top of the quarter panel cover assembly

up into the retainer.

Step One

2. Engage the plastic retainers on the front of the cover

assembly (toward the front of the vehicle) starting at

the top, and working downward.

Step Two

NOTE:

It is critical that the retainers are fully engaged before the

vehicle resumes motion.
3. Secure the hook-and-loop fastener at the upper front

corner of each quarter panel cover assembly by

pressing firmly.

Step Three

CAUTION!

Failure to follow all quarter panel cover assembly and

rear window install steps could result in damage to the

Soft Top or vehicle.

23_JT_OM_EN_USC_t.book Page 84

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды