Jeep GLADIATOR 2023 страница 99 Скачать руководство пользователя

Страница: 99 / 420

GETTING TO KNOW YOUR VEHICLE

OOR

RAME

NSTALLATION

1. Install the front door frame first.
2. Ensure the windshield is in the “up” position.

Carefully place the front door frame in the rubber seal

at the top of the windshield, and line up the holes for

the Torx head fasteners (two for each door).

3. Swing the frame bracket around the side of the door

frame, and insert the fasteners from underneath.

Tighten with the #T40 Torx head driver until they are

snug, being careful not to cross-thread the fasteners

or overtighten. Refer to the following table for the

appropriate torque specifications for the door frame

fasteners.

Tighten Fasteners

4. Set the rear door frame pin into the hole on top of the

body side, just behind the rear door opening.

5. Carefully position the top of the door frame onto the

rear belt rail and the rear of the front door frame,

making sure the rubber seals lie flat. Ensure the seals

are installed correctly to avoid water leaks.

Step Five

6. Insert the fasteners from underneath. Tighten with

the #T40 Torx head driver until they are snug, being

careful not to cross-thread the fasteners or

overtighten. Refer to the previous table for the

appropriate torque specifications for the door frame

fasteners.

WARNING!

Do not drive your vehicle on public roads with the door

and/or door frame(s) removed as you will lose the

protection that they can provide. This procedure is

furnished for use during off-road operation only.

Target Torque

Specification For

Torx Fasteners

Maximum

Minimum

44.2 in-lb

(5 N·m)

53.1 in-lb

(6 N·m)

35.4 in-lb

(4 N·m)

CAUTION!

Do not overtighten Torx fasteners. You can strip the

fasteners if they are overtightened.

23_JT_OM_EN_USC_t.book Page 97

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды