Jeep GLADIATOR 2023 страница 131 Скачать руководство пользователя

Страница: 131 / 420

GETTING TO KNOW YOUR INSTRUMENT PANEL

129

Off Road+ Indicator Light —

If Equipped

This indicator light will illuminate when

Off Road+ has been activated.

Cargo Light On Indicator Light

This indicator light will illuminate when the

Bed Lamp has been activated.

Wait To Start Indicator Light —

If Equipped

This indicator light will illuminate for

approximately two seconds when the ignition is

turned to the ON/RUN position. Its duration

may be longer based on colder operating

conditions. Vehicle will not initiate start until telltale is

no longer displayed.

NOTE:

The Wait To Start Light may not illuminate if the intake

manifold temperature is warm enough.

Low Diesel Exhaust Emissions Additive

AdBlue® (UREA) Indicator Light —

If Equipped

The Low Diesel Exhaust Emissions Additive

AdBlue® (UREA) indicator light illuminates

when the AdBlue® (UREA) level is low.

Fill the AdBlue® (UREA) tank as soon as possible with at

least 1.3 gallons (5 liters) of AdBlue® (UREA).
If filling the tank is done with a remaining range of

AdBlue® (UREA) in the tank equal to zero, you may need

to wait two minutes before starting the vehicle.

Water In Fuel Indicator Light — If Equipped

The Water In Fuel Indicator Light will illuminate

when there is water detected in the fuel filter. If

this light remains on, DO NOT start the vehicle

before you drain the water from the fuel filter to

prevent engine damage, and please see an authorized

dealer.

REEN

NDICATOR

IGHTS

4WD Auto Indicator Light — If Equipped

This light alerts the driver that the vehicle is in

the four-wheel drive auto mode. The system will

provide power to all four wheels and shift the

power between the front and rear axles as

needed. This will provide maximum traction in dry and

slippery conditions.

Cruise Control SET Indicator Light —

If Equipped With A Premium Instrument

Cluster

This indicator light will illuminate when the

cruise control is set to the desired speed

page 160.

Front Fog Indicator Light —

If Equipped

This indicator light will illuminate when the

front fog lights are on

page 52.

Parking/Headlights On Indicator Light

This indicator light will illuminate when the

parking lights or headlights are turned on.

CAUTION!

The presence of water in the fuel system circuit may

cause severe damage to the injection system and

irregular engine operation. If the indicator light is

illuminated, contact an authorized dealer as soon as

possible to bleed the system. If the previously

mentioned indicators come on immediately after

refueling, water or AdBlue® (UREA) have probably been

poured into the tank: switch the engine off immediately

and contact an authorized dealer.

23_JT_OM_EN_USC_t.book Page 129

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды