Jeep GLADIATOR 2023 Скачать руководство пользователя

Страница: 304 / 420

302

SAFETY

To Install A LATCH-Compatible Child

Restraint

If the selected seating position has a Switchable

Automatic Locking Retractor (ALR) seat belt, stow the seat

belt, following the instructions below.

page 303 to

check what type of seat belt each seating position has.
1. Loosen the adjusters on the lower straps and on the

tether strap of the child seat so that you can more

easily attach the hooks or connectors to the vehicle

anchorages.

2. Place the child seat between the lower anchorages

for that seating position. If the second row seat can

be reclined, you may recline the seat and/or raise the

head restraint (if adjustable) to get a better fit. If the

rear seat can be moved forward and rearward in the

vehicle, you may wish to move it to its rear-most

position to make room for the child seat. You may

also move the front seat forward to allow more room

for the child seat.

3. Attach the lower hooks or connectors of the child

restraint to the lower anchorages in the selected

seating position.

4. If the child restraint has a tether strap, connect it to

the top tether anchorage. See

page 305 for

directions to attach a tether anchor.

5. Tighten all of the straps as you push the child

restraint rearward and downward into the seat.

Remove slack in the straps according to the child

restraint manufacturer’s instructions.

6. Test that the child restraint is installed tightly by

pulling back and forth on the child seat at the belt

path. It should not move more than 1 inch (25.4 mm)

in any direction.

How To Stow An Unused Switchable-ALR

(ALR) Seat Belt:

When using the LATCH attaching system to install a child

restraint, stow all ALR seat belts that are not being used

by other occupants or being used to secure child

restraints. An unused belt could injure a child if they play

with it and accidentally lock the seat belt retractor. Before

installing a child restraint using the LATCH system, buckle

the seat belt behind the child restraint and out of the

child’s reach. If the buckled seat belt interferes with the

child restraint installation, instead of buckling it behind

the child restraint, route the seat belt through the child

restraint belt path and then buckle it. Do not lock the seat

belt. Remind all children in the vehicle that the seat belts

are not toys and that they should not play with them.

WARNING!



Improper installation of a child restraint to the LATCH

anchorages can lead to failure of the restraint. The

child could be badly injured or killed. Follow the child

restraint manufacturer’s directions exactly when

installing an infant or child restraint.



Child restraint anchorages are designed to withstand

only those loads imposed by correctly-fitted child

restraints. Under no circumstances are they to be

used for adult seat belts, harnesses, or for attaching

other items or equipment to the vehicle.

23_JT_OM_EN_USC_t.book Page 302

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды