Jeep GLADIATOR 2023 страница 355 Скачать руководство пользователя

Страница: 355 / 420

SERVICING AND MAINTENANCE

353

Selection Of Coolant

For further information

page 397.

NOTE:



Mixing of engine coolant (antifreeze), other than

specified Organic Additive Technology (OAT) engine

coolant, may result in engine damage and may

decrease corrosion protection. OAT engine coolant is

different and should not be mixed with Hybrid Organic

Additive Technology (HOAT) engine coolant or any

“globally compatible” coolant. If a non-OAT engine

coolant is introduced into the cooling system in an

emergency, the cooling system will need to be drained,

flushed, and refilled with fresh OAT coolant

(conforming to MS.90032), by an authorized dealer as

soon as possible.



Do not use water alone or alcohol-based engine

coolant products. Do not use additional rust inhibitors

or anti-rust products, as they may not be compatible

with the radiator engine coolant and may clog the radi

ator.



This vehicle has not been designed for use with

propylene glycol-based engine coolant. Use of

propylene glycol-based engine coolant is not

recommended.



Some vehicles require special tools to add coolant

properly. Failure to fill these systems properly could

lead to severe internal engine damage. If any coolant is

needed to be added to the system please contact an

authorized dealer.

Adding Coolant

Your vehicle has been built with an improved engine

coolant (OAT coolant conforming to MS.90032) that

allows extended maintenance intervals. This engine

coolant (antifreeze) can be used up to 10 years or

150,000 miles (240,000 km) before replacement.

To prevent reducing this extended maintenance period, it

is important to use the same engine coolant (OAT coolant

conforming to MS.90032) throughout the life of your

vehicle.
Please review these recommendations for using Organic

Additive Technology (OAT) engine coolant that meets the

requirements of the manufacturer Material Standard

MS.90032. When adding engine coolant (antifreeze):



We recommend using Mopar® Antifreeze/Coolant

10 Year/150,000 Mile (240,000 km) Formula OAT

(Organic Additive Technology) that meets the require

ments of the manufacturer Material Standard

MS.90032.



Mix a minimum solution of 50% OAT engine coolant

that meets the requirements of the manufacturer

Material Standard MS.90032 and distilled water.

Use higher concentrations (not to exceed 70%) if

temperatures below −34°F (−37°C) are anticipated.

Please contact an authorized dealer for assistance.



Use only high purity water, such as distilled or deion

ized water, when mixing the water/engine coolant solu

tion. The use of lower quality water will reduce the

amount of corrosion protection in the engine cooling

system.

NOTE:



It is the owner's responsibility to maintain the proper

level of protection against freezing according to the

temperatures occurring in the area where the vehicle is

operated.



Some vehicles require special tools to add coolant

properly. Failure to fill these systems properly could

lead to severe internal engine damage. If any coolant is

needed to be added to the system, please contact an

authorized dealer.



Mixing engine coolant types is not recommended and

can result in cooling system damage. If HOAT and OAT

coolant are mixed in an emergency, have an authorized

dealer drain, flush, and refill with OAT coolant

(conforming to MS.90032) as soon as possible.

23_JT_OM_EN_USC_t.book Page 353

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды