Jeep GLADIATOR 2023 Скачать руководство пользователя

Страница: 124 / 420

122

GETTING TO KNOW YOUR INSTRUMENT PANEL

WARNING LIGHTS AND MESSAGES

The warning/indicator lights will illuminate in the

instrument panel together with a dedicated message and/

or acoustic signal when applicable. These indications are

indicative and precautionary and as such must not be

considered as exhaustive and/or alternative to the

information contained in the Owner’s Manual, which you

are advised to read carefully in all cases. Always refer to

the information in this chapter in the event of a failure

indication. All active telltales will display first if applicable.

The system check menu may appear different based upon

equipment options and current vehicle status. Some

telltales are optional and may not appear.

ARNING

IGHTS

Air Bag Warning Light

This warning light will illuminate to indicate a

fault with the air bag, and will turn on for four to

eight seconds as a bulb check when the

ignition is placed in the ON/RUN or ACC/ON/

RUN position. This light will illuminate with a single chime

when a fault with the air bag has been detected, it will stay

on until the fault is cleared. If the light is not on during

startup, stay on, or turns on while driving, have the system

inspected at an authorized dealer as soon as possible.

Brake Warning Light

This warning light monitors various brake

functions, including brake fluid level and

parking brake application. If the brake light

turns on it may indicate that the parking brake

is applied, that the brake fluid level is low, or that there is

a problem with the Anti-Lock Brake System reservoir.

Engine Will Not Start Service AdBlue®

System See Dealer

NOTE:



The display may take up to five seconds to update after adding 2 gallons (7.5 Liters) or more of AdBlue® (UREA) to the AdBlue®

(UREA) tank. If you have a fault related to the AdBlue® (UREA) system, the display may not update to the new level. See an authorized

dealer for service.



AdBlue® freezes at temperatures lower than 12°F (-11°C). If the car stands for a long time at this temperature, refilling could be

difficult. For this reason, it is advised to park the vehicle in a garage and/or heated environment, and wait for the AdBlue® (UREA)

to return to liquid state before topping up.

Gasoline Particulate Filter (GPF) System Messages — If Equipped:

Exhaust System Service Required

The engine control unit has detected an issue with the gasoline particulate filter system. See an authorized dealer.

Exhaust System Regeneration in

Process Continue Driving

The regeneration procedure is controlled automatically by the engine control unit according to the filter conditions and car use

conditions. The following may occur during regeneration: increased levels of Noise Vibration and Harshness (NVH) and reduced engine

performance. The driver should continue driving normally. This message will continue to appear until regeneration is complete.

Exhaust System Regeneration Complete

The exhaust gas filter regeneration has been completed. This message will briefly appear.

MESSAGE

DESCRIPTION

23_JT_OM_EN_USC_t.book Page 122

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды