Jeep GLADIATOR 2023 Скачать руководство пользователя страница 271

Страница: 271 / 420

SAFETY

269

Entering From The Rear
Vehicles that come up from behind your vehicle on either

side and enter the rear detection zone with a relative

speed of less than 30 mph (48 km/h).

Rear Monitoring

Overtaking Traffic
If you pass another vehicle slowly with a relative speed

less than 15 mph (24 km/h) and the vehicle remains in

the blind spot for approximately 1.5 seconds, the warning

light will be illuminated. If the difference in speed between

the two vehicles is greater than 15 mph (24 km/h), the

warning light will not illuminate.

Overtaking/Approaching

Overtaking/Passing

The BSM system is designed not to issue an alert on

stationary objects such as guardrails, posts, walls, foliage,

berms, etc. However, occasionally the system may alert on

such objects. This is normal operation and your vehicle

does not require service.

The BSM system will not alert you of objects that are

traveling in the opposite direction of the vehicle in

adjacent lanes

page 404.

Opposing Traffic

WARNING!

The Blind Spot Monitoring system is only an aid to help

detect objects in the blind spot zones. The BSM system

is not designed to detect pedestrians, bicyclists, or

animals. Even if your vehicle is equipped with the BSM

system, always check your vehicle’s mirrors, glance

over your shoulder, and use your turn signal before

changing lanes. Failure to do so can result in serious

injury or death.

23_JT_OM_EN_USC_t.book Page 269

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Бренды по названию

Популярные бренды