Jeep GLADIATOR 2023 Скачать руководство пользователя страница 101

Страница: 101 / 420

GETTING TO KNOW YOUR VEHICLE

5. Using the provided #T40 Torx head driver, remove

the four Torx head fasteners located along the

interior of the windshield (two on each side of the

header trim).

Step Five

NOTE:

Store all of the mounting bolts in their original threaded

holes and tighten for safekeeping, or in the fastener bin

located below the rear seat.
6. Lower the windshield gently until it contacts the

tie-down bumpers (if equipped).

Step Six

7. Secure the windshield by passing a cinch strap

through the tie-down bumper on either side of the

hood and on the windshield frame. Tighten the strap

to secure the windshield in place.

Adaptive Cruise Control (ACC)/Forward

Collision Warning (FCW) Sensor Protective

Cover — If Equipped

Your vehicle may be equipped with a protective cover that

is to be used whenever the windshield is folded down in

order to protect the ACC/FCW sensor. To install the cover,

refer to the following instructions:
1. Secure the top part of the cover so that it hinges to

the header.

2. Swing the cover down and push on it so that it covers

the opening.

3. Check to make sure the cover is secured properly.

Protective Cover Installed

1 — Outer Torx Fasteners
2 — Center Torx Fasteners

1 — Washer Nozzle
2 — Bumper
3 — Tie-Down

CAUTION!

Do Not Overtighten! Damage to the windshield could result.

23_JT_OM_EN_USC_t.book Page 99

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Бренды по названию

Популярные бренды