Jeep GLADIATOR 2023 Скачать руководство пользователя

Страница: 315 / 420

IN CASE OF EMERGENCY

313

NOTE:



Your vehicle may be transmitting data as authorized by

the subscriber.



Never place anything on or near the vehicle’s LTE

(voice/data) or 4G (data) and GPS antennas. You could

prevent LTE (voice/data) or 4G (data) and GPS signal

reception, which can prevent your vehicle from placing

an emergency call. An operable LTE (voice/data) or 4G

(data) network connection and a GPS signal is required

for the SOS Call system to function properly.



Changes or modifications not expressly approved by

the party responsible for compliance could void the

user's authority to operate the equipment.

Automatic SOS — If Equipped
Automatic SOS is a hands-free safety service that can

immediately connect you with help in the event that your

vehicle’s airbags deploy. Please refer to your provided

radio supplement for complete information.

JACKING AND TIRE CHANGING

Use this QR code to access your digital

experience.

REPARATIONS

ACKING

1. Park on a firm, level surface. Avoid ice or slippery

areas.

2. Turn on the Hazard Warning Flashers.
3. Apply the parking brake.
4. Shift the automatic transmission into PARK (P), or a

manual transmission into REVERSE.

5. Cycle the ignition to OFF.

CAUTION!

To avoid damage to the mirror during cleaning, never

spray any cleaning solution directly onto the mirror.

Apply the solution onto a clean cloth and wipe the

mirror clean.

WARNING!



Do not attempt to change a tire on the side of the

vehicle close to moving traffic. Pull far enough off the

road to avoid the danger of being hit when operating

the jack or changing the wheel.



Being under a jacked-up vehicle is dangerous. The

vehicle could slip off the jack and fall on you. You

could be crushed. Never put any part of your body

under a vehicle that is on a jack. If you need to get

under a raised vehicle, take the vehicle to a service

center where it can be raised on a lift.



Never start or run the engine while the vehicle is on

a jack.



The jack is designed to be used as a tool for changing

tires only. The jack should not be used to lift the

vehicle for service purposes. The vehicle should be

jacked on a firm level surface only. Avoid ice or slip

pery areas.

WARNING!

Do not attempt to change a tire on the side of the

vehicle close to moving traffic. Pull far enough off the

road to avoid being hit when operating the jack or

changing the wheel.

23_JT_OM_EN_USC_t.book Page 313

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды