Jeep GLADIATOR 2023, Руководство пользователя

Страница: 319 / 420

IN CASE OF EMERGENCY 317
(Continued)
6. Pull the retainer through the center of the wheel.
Removing The Retainer
J
ACKING
I
NSTRUCTIONS
Warning Label
1. Remove the spare tire, jack and tools from the
stored location.
2. Using the lug wrench, loosen the wheel nuts (but do
not remove) by turning them counterclockwise one
turn while the wheel is still on the ground.
3. Assemble the jack and jacking tools. Connect the jack
handle driver to the extension, then to the lug wrench.
Assembled Jack And Tools
WARNING!
Carefully follow these tire changing warnings to help
prevent personal injury or damage to your vehicle:
 Always park on a firm, level surface as far from the
edge of the roadway as possible before raising the
vehicle.
 Turn on the Hazard Warning Flashers.

Apply the parking brake firmly and shift an automatic
transmission in PARK; a manual transmission to
REVERSE.

Block the wheel diagonally opposite the wheel to
be raised.

Never start or run the engine with the vehicle on a
jack.

Do not let anyone sit in the vehicle when it is on a
jack.
 Do not get under the vehicle when it is on a jack.
If you need to get under a raised vehicle, take it to a
service center where it can be raised on a lift.
 Only use the jack in the positions indicated and for
lifting this vehicle during a tire change.

If working on or near a roadway, be extremely careful
of motor traffic.

To assure that spare tires, flat or inflated, are
securely stowed, spares must be stowed with the
valve stem facing the ground.
WARNING!
CAUTION!
Do not attempt to raise the vehicle by jacking on
locations other than those indicated.
7
23_JT_OM_EN_USC_t.book Page 317