Jeep GLADIATOR 2023 Скачать руководство пользователя

Страница: 140 / 420

138

STARTING AND OPERATING

OLD

EATHER

RECAUTIONS

Operation in ambient temperature below 32°F (0°C) may

require special considerations. The following charts

suggest these options:

Fuel Operating Range

NOTE:

Use Ultra Low Sulfur Diesel (ULSD) Fuels ONLY.

Fuel Operating Range Chart

*Number 1 ULSD Fuel should only be used where

extended arctic conditions 0°F (-18°C) exist.

NOTE:



Use of Climatized ULSD Fuel or Number 1 ULSD fuel

results in a noticeable decrease in fuel economy.



Climatized ULSD fuel is a blend of Number 2 ULSD fuel

and Number 1 ULSD fuel which reduces the tempera

ture at which wax crystals form in fuel.



The fuel grade should be clearly marked on the pump

at the fuel station.



The engine requires the use of Ultra Low Sulfur Diesel

Fuel. Use of incorrect fuel could result in engine and

exhaust system damage

page 394.



If climatized or Number 1 ULSD fuel is not available,

and you are operating below 20°F (-6°C), in sustained

arctic conditions, Mopar® Premium Diesel Fuel Treat

ment (or equivalent) is recommended to avoid gelling

(see Fuel Operating Range Chart).

Engine Oil Usage

See Engine Fluids and Lubricants for the correct engine oil

viscosity

page 397.

Engine Warm-Up

Avoid full throttle operation when the engine is cold. When

starting a cold engine, bring the engine up to operating

speed slowly to allow the oil pressure to stabilize as the

engine warms up.
If temperatures are below 32°F (0°C), operate the engine

at moderate speeds for five minutes before full loads are

applied.

NGINE

DLING

Avoid prolonged idling. Long periods of idling may be

harmful to your engine because combustion chamber

temperatures can drop so low that the fuel may not burn

completely. Incomplete combustion allows carbon and

varnish to form on piston rings, cylinder head valves,

turbocharger, and injector nozzles. Also, the unburned

fuel can enter the crankcase, diluting the oil and causing

rapid wear to the engine.

23_JT_OM_EN_USC_t.book Page 138

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды