Jeep GLADIATOR 2023 Скачать руководство пользователя

Страница: 95 / 420

GETTING TO KNOW YOUR VEHICLE

NSTALLING

ARD

If the door frames are installed from soft top usage, they

must be removed prior to installation of the hard top

page 96.

To install the hard top, place the hard top on the vehicle

while making sure that the top is sitting flush with the body

at the sides and across the back. Then follow the removal

steps in reverse order.

NOTE:



Inspect the hard top seals for damage and replace if

necessary.



Install the hard top using the same steps for removal in

reverse order.
When reinstalling the interior soft trim panel:



Be sure the panel is centered so that there is an

even gap on both sides.



Apply pressure over the hook-and-loop fasteners

to ensure they are properly secured.

The Torx head fasteners that attach the hard top to

the body should be torqued to 155 in-lb +/- 22 in-lb

(17.5 N·m +/- 2.5 N·m) using the provided #T50 Torx head

driver and ratchet.

UNRIDER

® F

ARD

—

QUIPPED

The Sunrider® soft top can be used in place of the Hard

Top Freedom Panels for quick and easy opening of the

area above the driver and front passenger seats.

Sunrider® For Hard Top

CAUTION!



The front panel(s) must be positioned properly to

ensure sealing. Improper installation can cause

water to leak into the vehicle's interior.



The hard top assembly must be positioned properly

to ensure sealing. Improper installation can cause

water to leak into the vehicle's interior.



The hard top is not designed to carry any additional

loads, such as after-market roof racks, spare tires,

building materials, hunting or camping supplies, etc.

page 107.



Do not move your vehicle until the top has been

either fully attached to the windshield frame and

body, or fully removed.



The removal of the hard top requires four adults

located on each corner. Failure to follow this caution

could damage the hard top.

CAUTION!

Do not overtighten Torx fasteners. Damage to the

retainers will occur.

WARNING!

Do not open or close the Sunrider® top while driving.

Operating the top while driving could cause the driver to

lose control of the vehicle. Failure to follow this warning

may result in serious injury or death.

23_JT_OM_EN_USC_t.book Page 93

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды