Jeep GLADIATOR 2023 Скачать руководство пользователя

Страница: 331 / 420

IN CASE OF EMERGENCY

329

OUR

–W

HEEL

RIVE

ODELS

FCA LLC US recommends towing with all wheels OFF the

ground. Acceptable methods are to tow the vehicle on a

flatbed or with one end of the vehicle raised and the

opposite end on a towing dolly.
If flatbed equipment is not available and the transfer case

is operable, the vehicle may be towed (in the forward

direction, with ALL wheels on the ground), IF the transfer

case is in NEUTRAL (N) and the transmission is in PARK (P)

(for automatic transmissions) or in gear (NOT in NEUTRAL,

for manual transmissions)

page 190.

ITHOUT

Special care must be taken when the vehicle is towed with

the ignition in the OFF position. The only approved method

of towing without the key fob is with a flatbed truck. Proper

towing equipment is necessary to prevent damage to the

vehicle.

MERGENCY

OOKS

—

QUIPPED

If your vehicle is equipped with tow hooks, they are

mounted in the front and the rear fascia/bumpers.

Front Tow Hooks

NOTE:

Depending on vehicle trim level, rear tow hooks may vary.

Rear Tow Hook

Rear Tow Hooks

CAUTION!



Front or rear wheel lifts must not be used (if the

remaining wheels are on the ground). Internal

damage to the transmission or transfer case will

occur if a front or rear wheel lift is used when towing.



Towing this vehicle in violation of the approved

requirements can cause severe transmission and/or

transfer case damage. Damage from improper

towing is not covered under the New Vehicle Limited

Warranty.

WARNING!



Do not use a chain for freeing a stuck vehicle. Chains

may break, causing serious injury or death.



Stand clear of vehicles when pulling with tow hooks.

Tow straps may become disengaged, causing

serious injury.

23_JT_OM_EN_USC_t.book Page 329

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды