Jeep GLADIATOR 2023 страница 307 Скачать руководство пользователя

Страница: 307 / 420

SAFETY

305

Installing A Child Restraint With A

Switchable Automatic Locking Retractor

(ALR):

Child restraint systems are designed to be secured in

vehicle seats by lap belts or the lap belt portion of a lap/

shoulder belt.

1. Place the child seat in the center of the seating

position. If the second row seat can be reclined, you

may recline the seat and/or raise the head restraint

(if adjustable) to get a better fit. If the rear seat can

be moved forward and rearward in the vehicle, you

may wish to move it to its rear-most position to make

room for the child seat. You may also move the front

seat forward to allow more room for the child seat.

2. Pull enough of the seat belt webbing from the

retractor to pass it through the belt path of the

child restraint. Do not twist the belt webbing in

the belt path.

3. Slide the latch plate into the buckle until you hear a

“click.”

4. Pull on the webbing to make the lap portion tight

against the child seat.

5. To lock the seat belt, pull down on the shoulder part

of the belt until you have pulled all the seat belt

webbing out of the retractor. Then, allow the webbing

to retract back into the retractor. As the webbing

retracts, you will hear a clicking sound. This means

the seat belt is now in the Automatic Locking mode.

6. Try to pull the webbing out of the retractor. If it is

locked, you should not be able to pull out any

webbing. If the retractor is not locked, repeat step 5.

7. Finally, pull up on any excess webbing to tighten the

lap portion around the child restraint while you push

the child restraint rearward and downward into the

vehicle seat.

8. If the child restraint has a top tether strap and the

seating position has a top tether anchorage, connect

the tether strap to the anchorage and tighten the

tether strap. See

page 305 for directions to attach

a tether anchor.

9. Test that the child restraint is installed tightly by

pulling back and forth on the child seat at the belt

path. It should not move more than 1 inch (25.4 mm)

in any direction.

Any seat belt system will loosen with time, so check the

belt occasionally, and pull it tight if necessary.

Installing Child Restraints Using The Top

Tether Anchorage

WARNING!



Improper installation or failure to properly secure a

child restraint can lead to failure of the restraint.

The child could be badly injured or killed.



Follow the child restraint manufacturer’s directions

exactly when installing an infant or child restraint.

WARNING!

Do not attach a tether strap for a rear-facing car seat to

any location in front of the car seat, including the seat

frame or a tether anchorage. Only attach the tether

strap of a rear-facing car seat to the tether anchorage

that is approved for that seating position, located

behind the top of the vehicle seat. See

page 299 for

the location of approved tether anchorages in your

vehicle.

23_JT_OM_EN_USC_t.book Page 305

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды