Jeep GLADIATOR 2023 Скачать руководство пользователя

Страница: 132 / 420

130

GETTING TO KNOW YOUR INSTRUMENT PANEL

Stop/Start Active Indicator Light —

If Equipped

This indicator light will illuminate when the

Stop/Start function is in “Autostop” mode.

Turn Signal Indicator Lights

When the left or right turn signal is activated,

the turn signal indicator will flash

independently and the corresponding exterior

turn signal lamps will flash. Turn signals can

be activated when the multifunction lever is moved

down (left) or up (right).

NOTE:



A continuous chime will sound if the vehicle is driven

more than 1 mile (1.6 km) with either turn signal on.



Check for an inoperative outside light bulb if either indi

cator flashes at a rapid rate.

Rear Seat Belt Fastened Indicator Light —

If Equipped With A Premium Instrument

Cluster

This light indicates when a rear seat belt has

been buckled in the second row. A telltale will

display in the upper right corner of the

instrument cluster display to correspond to the

specific seating position once the seat belt has been

buckled

page 277.

HITE

NDICATOR

IGHTS

Adaptive Cruise Control (ACC) Ready

Indicator Light — If Equipped With a

Premium Instrument Cluster

This light will turn on when the vehicle

equipped with Adaptive Cruise Control (ACC)

has been turned on, but not set.

Adaptive Cruise Control (ACC) Ready

Indicator Light — If Equipped With a Base

Instrument Cluster

This light will turn on when the vehicle

equipped with ACC has been turned on, but

not set.

Adaptive Cruise Control (ACC) Set Indicator

Light — If Equipped With a Base Instrument

Cluster

This light will turn on when the vehicle

equipped with ACC has been turned on, but

not set.

Two-Wheel Drive High Indicator Light —

If Equipped With A Premium Instrument

Cluster

This light alerts the driver that the vehicle is in

the Two-Wheel Drive High mode.

Rear Seat Belt Fastened Indicator Light —

If Equipped With A Base Instrument

Cluster

This light indicates when a rear seat belt has

been buckled in the second row. A telltale will

display in the upper right corner of the

instrument cluster display to correspond to the

specific seating position once the seat belt has been

buckled.

Rear Seat Belt Reminder Indicator Light —

If Equipped With A Base Instrument

Cluster

This light indicates when a rear seat belt is

unbuckled in the second row. When the ignition

is first placed in the ON/RUN or ACC/ON/RUN

position, and if a seat belt in the second row is

unbuckled, a light corresponding to the specific seat will

turn on in the upper right portion of the instrument cluster

display, momentarily replacing the configurable corner

information. If a second row seat belt that was buckled at

the start of the trip is unbuckled, the Rear Seat Belt

Reminder Light will change from the buckled to the

unbuckled symbol, and a chime will sound.

23_JT_OM_EN_USC_t.book Page 130

Содержание GLADIATOR 2023





































































































































































































































































































































































































































Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды

Jeep GLADIATOR 2023, Руководство пользователя

Результаты поиска

Содержание GLADIATOR 2023

Отзывы:

Похожие инструкции для GLADIATOR 2023

Бренды по названию

Популярные бренды